You can shred up to 5 sheets (80g/m2 paper) at the same time. Inserting credit cards: • Insert the credit card into the middle of the cutter opening from above. You can only shred one credit card at a time. Inserting a CD: • Insert the CD into the cutter opening (CD) from above. You can only shred one CD at a time. Clearing a material blockage: • Push the switch into the position (REVERSE) should the material become jammed. Reverse running is now engaged and the item to be shredded will be ej

Pass this manual on to whoever might acquire the appliance at a future date. - 1 SHREDDER KH 4407 Intended Use This Shredder is intended exclusively for the shredding of paper, credit cards and CD’s. All other usages or modifications are regarded as contrary to the operating instructions and contain a considerable risk of accidents. . Important safety instructions The following safety instructions must always be complied with when using electrical appliances: • Do not place the appliance in clos

• Ensure that the power cable never becomes moist or wet during operation. To avoid the risk of injury: • This Strip Cut Shredder attachment should be used by only one person at a time. • Never leave the appliance unattended whilst in use. • Keep loose clothing , long hair and jewelry etc. well away from the cutter opening. • NEVER place your fingers into the cutter opening . • Keep pets away from the appliance. They could injure themselves. • This appliance is not intended for use by individual

Observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre. Dispose of all packaging materials in an environmentally friendly manner. The warranty for this appliance is for 3 years from the date of purchase. The appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase. In the case of a warranty claim, please make contact by telephone with our service department. Only in this

Putting into operation • First of all, place the cutter attachment q onto the roller container u so that the power cable is located at the rear, i.e. on the closed side. • Push the waste receptacle t into the roller container u. • Connect the paper shredder to a power socket. Operation Switching the appliance on: • Place the switch wto the position for shredding. When the appliance is ready, the green LED glows. Note: The Paper Shredder is fitted with a safety stop: If the waste receptacle tis n