Log:
Évaluations - 3, GPA: 4 ( )

Instructions Euro-Pro, Modèle DRESSMAKER 1104HV

Fabricant : Euro-Pro
Taille : 1.47 mb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


Make sure that the batteries are in the correct position as marked on the inside of the battery compartment. 3. Replace the battery compartment cover. Caution: Make sure that the On/Off Button is in the “Off” position when inserting or changing the batteries. If the On/Off button is in the “On” position when inserting or changing the batteries, the sewing machine may run suddenly. THREADING UPPER THREAD Caution: When threading the sewing machine, make sure that the On/Off button is in the “Off position. 1. Place the spool of thread into the spool pin. 2. Thread the machine following this sequence: ©, ©, ©, @, ©, ©, ®, ®, ®. 3 BOBBIN WINDING Needle Bar Thread Clamper To wind your bobbins: 1. Press on the bobbin winder lever to raise the bobbin winding pin. 2. Place an empty bobbin on the bobbin winding pin. 3. Place a spool of thread on the spool pin spindle. 4. Take the end of the thread from the thread spool and wind it counter clockwise around the upper section of the thread clamper following the numbered sequence in the illustration above. 5. Continue taking the thread around the needle bar. 6. Wrap the thread counter clockwise around the empty bobbin several times. 7. Press the bobbin winder button and run until the bobbin is full. 8. When the bobbin is full, release the bobbin winder button and remove the bobbin from the bobbin winding pin. 9. Lift the bobbin winding lever to lower the bobbin winding pin. 8 TENSION ADJUSTMENT Caution: Never adjust the thread tension while sewing. A correctly adjusted seam has the upper and the lower threads even and the junction in the middle of the fabric. (See illustration below.) -Upper Thread I—Fabric Lower Thread 1. If the upper thread (visible on the top of the fabric) becomes a straight line, turn the thread tension dial, counter clockwise to obtain a balanced stitch. (See illustration below.) Upper Thread n n n—ft—ft- Fabric Lower Thread If the lower thread (visible on the underside of the fabric) becomes a straight line, turn the thread tension dial, clockwise to obtain a balanced stitch. (See illustration below.) Upper Thread _n_Q_O_O_Li_ Fabnc- Lower Thread^ SETTING THE SEWING SPEED This sewing machine has two (2) sewing speeds. To adjust the sewing speed, press the speed button. When the button is depressed, it is on the faster speed. When the button is up, this is the lower speed. High speed Low speed 7 REPLACING THE BOBBIN Caution: When replacing or inserting the bobbin, make sure that the On/Off button is in the “Off” position. 1. Press the bobbin cover release button and remove the bobbin cover. 2. Insert the new bobbin into the compartment leaving a 3-inch tail. 3. Hold the end of the upper thread with your right hand and turn the hand wheel slowly counter clockwise until the needle goes down and up again to its highest position. Pull the upper thread slowly and the lower thread will come up in a loop. Pull up both threads to the back and place...

Ce manuel est également adapté pour les modèles :
Machines à coudre - DRESSMAKER 1104HG (1.47 mb)
Machines à coudre - DRESSMAKER 1104HB (1.47 mb)
Machines à coudre - DRESSMAKER 1104HP (1.47 mb)
Machines à coudre - DRESSMAKER 1104HW (1.47 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories