Évaluations - 3, GPA: 4 ( )

Fabricant : Casio Taille : 849.81 kb Nom Fichier : Langue d'enseignement:

You should have a large Phillips head (+) screwdriver on hand for assembly. • The polystyrene foam packing material of the stand Is required for assembly. Do not throw away the packing material and keep It on hand for assembly. • Check the items that come with the unit to make sure that everything shown in Figure 1 (( A) through CD) is included. All screws are in a plastic bag inside of the packing cardboard. Before Assembling the Stand O Place the piano onto a blanket, pillow, or other soft object, and then remove the left and right end covers from the piano (Figure 2). • Keep the two black screws (♦) from the left end cover on hand. You will need them when assembling the stand. You will not need the two screws from the right end cover for assembly, so keep them in a safe place in case you need them in the future. 0 Turn over the piano, insert the support piece A) into the groove along the bottom (★ in Figure 3), and secure it in place with two © screws (Figure 3). 0 Break the polystyrene packing material into six pieces as shown in Figure 4. Assembling the Stand When assembling the stand, you should have the piano standing up with its back facing downwards. PREPARATION_ • Use the six pieces of polystyrene foam to secure side panels ©, id) and back panel © In place. There should be some space between the edges of the side panels and the floor as shown In Figure 5. • If you do not have any packing material available, use a magazine or some other thick Item. Perform the following steps. o Attach side panel (cl to the piano. Secure the side panel in place using the two black screws (♦) that you removed from the left side cover (Figure 6). • Be sure to tighten the screws securely. 0 Attach side panel © to the other side of the piano. Partially tighten the two screws © (Figure 6). • In this case, do not tighten the screws all the way. If you do, you will not be able to insert the back panel © in the following step. 0 Attach back panel © to sides © and ©. Use the four screws © and four joint connectors © (Figure 6). • Insert the four joint connectors at the four locations on back panel ©. The holes In the joint connectors should be aligned with the holes in the back panel. • Lift up back panel © so its screw holes align with the screw holes in the side panels, and then tighten the screws ©. • If you have trouble inserting the screws © into the joint connector © holes, use a screwdriver to rotate the joint connector (★in Figure 6). CAUTION!_ • Never try to force the screws! Forcing the screws © to turn while the joint connector © holes are not aligned correctly can strip the screw threads. • Partially tighten the screws on one side of the back panel © and then tighten the screws on the other side completely. • Fully tighten the screws you partially tightened In step 2, above. • Next, fully tighten the screws that you partially tightened on one side of the back panel ©. ©After ensuring that all of the screws are fully tighten...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :