Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
4 Use the [A]/[B] buttons to select “SETUP WIZARD.” 5 Press the [B] button to select “LAN cable,” then press the [G] button to proceed to “NEXT.” 6 Make sure that the devices are connected as shown in the illustration of the display, then press the [G] button to proceed to “NEXT.” NEXT PAGE Internet Connection Guide 4 Connection 7 Press the [G](CONNECTION) button to check the connection to the special website. The settings are saved by checking the connection. • Because the settings are lost when you turn off the power of the instrument, be sure to save the settings and changes you made. 8 Press the [G](DONE) button to connect to the special website. When the special website appears, the network settings to the Internet are complete. Connection 7 Press the [G](CONNECTION) button to check the connection to the special website. The settings are saved by checking the connection. • Because the settings are lost when you turn off the power of the instrument, be sure to save the settings and changes you made. 8 Press the [G](DONE) button to connect to the special website. When the special website appears, the network settings to the Internet are complete. When the special website does not appear, refer to “Connection Help” on page 19. For more details on the operations in the special website, refer to the Owner’s Manual. NOTE Internet Connection Guide 5 Connection 1 Connect the devices according to the example. First turn the power of the instrument off, then connect the devices as shown in the illustration below, and finally turn the power on again. •For an illustration of the location of the USB TO DEVICE terminal, refer to the Owner’s Manual. 2 Press the [INTERNET] button. 3 Use the [DATA ENTRY] dial to select “Set the Internet connection,” then press the [ENTER] button to execute. Required Devices • USB wireless LAN adaptor For a list of USB wireless LAN adaptors whose compatibility has been confirmed by Yamaha, refer to the website: Connection 1 Connect the devices according to the example. First turn the power of the instrument off, then connect the devices as shown in the illustration below, and finally turn the power on again. •For an illustration of the location of the USB TO DEVICE terminal, refer to the Owner’s Manual. 2 Press the [INTERNET] button. 3 Use the [DATA ENTRY] dial to select “Set the Internet connection,” then press the [ENTER] button to execute. Required Devices • USB wireless LAN adaptor For a list of USB wireless LAN adaptors whose compatibility has been confirmed by Yamaha, refer to the website: * A USB wireless LAN adaptor which is not on the list cannot be used. • Access point with router (The router capability here is unnecessary if your modem has router capability.) • Modem (ADSL modem, optical network unit or cable modem) • About the confirmation and changes in the setting of the access point with router side, read the owner’s manual for the product you are using. • Before installing a new router, check that the router performs normally by connecting via a computer. Wireless LAN Connection Using USB LAN Adaptor NOTE USB wireless LAN adaptor USB TO DEVICE terminal Access point with router Modem Internet Set the instrument within 10–20 m from the access point. The signal will not be received if there is an obstacle blocking reception. NOTE NEXT PAGE Internet Connection Guide 6 Connection 4 Use the [A]/[B] buttons to select “SETUP WIZARD.” 5 Press the [C] button to select “Wireless LAN using USB LAN adaptor,” then press the [G] but- ton to proceed to “NEXT.” 6 Make sure that the devices are connected as shown in the illustration of the display, then press the [G] button to proceed to “NEXT.” NEXT PAGE Connection 4 Use the [A]/[B] buttons to select “SETUP WIZARD.” 5 Press the [C] button to select “Wireless LAN using USB LAN adaptor,” then press the [G] but- ton to proceed to “NEXT.” 6 Make sure that the devices are connected as shown in the illustration of the display, then press the [G] button to proceed to “NEXT.” NEXT PAGE Internet Connection Guide 7 Connection 7 Use the [B]/[C] buttons to select the desired setup of the Connection 7 Use the [B]/[C] buttons to select the desired setup of the wireless network. Setup by WPS (push button) You can make the setting for the wireless network by simply pressing the WPS button of the access point with router. The security is automatically set, you don’t need to make any other settings, such as key input, etc. •You need to make sure that your USB wireless LAN adaptor and access point with router support WPS. Check whether your USB wireless LAN adaptor supports WPS by accessing the URL of “Required Devices” on page 6. Press the [B] button to select “Setup by WPS (push button),” then press the [G] button to proceed to “NEXT.” Proceed to step 8. Setup after searching for wireless networks When the list of the access points near the instrument is displayed, select the access point to be used. The SSID, channel an...
Ce manuel est également adapté pour les modèles :Synthétiseur / piano, - CVP503 (545.04 kb)
Synthétiseur / piano, - CVP505 (545.04 kb)
Synthétiseur / piano, - CVP509 (545.04 kb)
Instruments de musique - PSR-S710 (545.04 kb)