Log:
Évaluations - 0, GPA: 0 ( )

Instructions Yamaha, Modèle P-105

Fabricant : Yamaha
Taille : 145.46 kb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


2 MIDI Transmit/Receive Channel Selection ................................................... 2 Local Control ON/OFF .................................................................................. 2 Program Change ON/OFF ............................................................................ 3 Control Change ON/OFF .............................................................................. 3 MIDI Data Format................................................................................. 4 MIDI Implementation Chart................................................................. 8 EN MIDI Functions MIDI Functions MIDI Transmit/Receive Channel Selection In any MIDI control setup, the MIDI channels of the transmitting and receiving devices must be matched for proper data transfer. This parameter enables you to specify the channel on which the instrument transmits or receives MIDI data. Setting the Transmit Channel While holding down the [DEMO/SONG] button, press and hold the [METRONOME/RHYTHM] button, then press one of the E0–G#1 keys. Setting the Receive Channel While holding down the [DEMO/SONG] button, press and hold the [METRONOME/RHYTHM] button, then press one of the A#1–D#3 keys. E0 G#1A#1 D#3 7 10 12 5 1 2 4689 11 13 14 16 3 15 OFF 13 16 ALL11 7523 8 10 12 14 15 1+2 9641 Transmit Channel Receive Channel (E0–G#1) (A#1–D#3) Local Control ON/OFF NOTE In Dual, Split or Duo, Voice 1 data is transmitted on its specified channel and Voice 2 data is transmitted on the next greater channel number relative to the specified channel. In this case, no data is transmitted if the transmit channel is set to “OFF.” NOTE ALL: “Multi-timbre” Receive. This allows simultaneous reception of different parts on all 16 MIDI channels, enabling the instrument to play multi-channel song data received from a computer. 1+2: “1+2” Receive. This allows simultaneous reception on channels 1 and 2 only, enabling the instrument to play 1 and 2 channel song data received from a computer. NOTE Program change and other like channel messages received will not affect the panel settings of the instrument or the notes you play on the keyboard. NOTE Data for the Demo Songs and Preset Songs cannot be transmitted via MIDI. “Local Control” refers to the fact that, normally, the keyboard of the instrument controls its internal tone generator, allowing the internal voices to be played directly from the keyboard. This situation is “Local Control On,” since the internal tone generator is controlled locally by its own keyboard. Local control can be turned OFF, however, so that the the keyboard of the instrument does not play the internal voices, but the appropriate MIDI information is still transmitted via the [USB TO HOST] terminal when notes are played on the keyboard. At the same time, the internal tone generator responds to MIDI information received via the [USB TO HOST] terminal. While holding down the [DEMO/SONG] button, press and hold the [METRONOME/RHYTHM] NOTE Default setting: ON button, then press the D6 key. Pressing the D6 key repeatedly toggles between Local Control On and Off. D6 P-105 MIDI Reference 2 MIDI Functions MIDI Functions F Normally the instrument will respond to MIDI program change numbers received from a computer, causing the same numbered voice to be selected on the corresponding channel (the keyboard voice does not change). The instrument will normally also send a MIDI program change number whenever one of its voices is selected, causing the same numbered voice or program to be selected on the computer if the computer is set up to receive and respond to MIDI program change numbers. This function makes it possible to cancel program change number reception and transmission so that voices can be selected on the instrument without affecting the computer. While holding down the [DEMO/SONG] button, press and hold the [METRONOME/RHYTHM] button, then press the D#6 key. Pressing the D#6 key repeatedly toggles between Program Change On and Off. D#6 Control Change ON/OFF NOTE For information on program change numbers for each of the Voices of the instrument, refer to page 5. NOTE Default setting: ON Normally the instrument will respond to MIDI control change data received from a computer, causing the voice on the corresponding channel to be affected by pedal and other “control” settings received from the controlling device (the keyboard voice is not affected). The instrument also transmits MIDI control change information when the pedal or other appropriate controls are operated. This function makes it possible to cancel control change data reception and transmission so that, for example, the pedal of the instrument and other controls can be operated without affecting a computer. While holding down the [DEMO/SONG] button, press and hold the [METRONOME/RHYTHM] button, then press the E6 key. Pressing the E6 key repeatedly toggles between Control Change On and Off. E6 NOTE For information on control changes that can be used with ...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories