Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
• When the batteries run down, replace them with a complete set of six new batteries. NEVER mix old and new batteries. Do not use different kinds of batteries (e.g. alkaline and manganese) at the same time. • If the instrument is not to be in use for a long time, remove the batteries from it, in order to prevent possible fluid leakage from the battery. NOTE • Use alkaline batteries for this instrument. Other types of batteries (including rechargeable batteries) may have sudden drops of power when battery power becomes low. PSR-E233/YPT-230 Owner’s Manual Setting Up Make all necessary connections BEFORE turning the power on. Connecting headphones and external audio equipment You can connect the PHONES/OUTPUT jack to a set of headphones, keyboard amplifier, stereo system, mixer, tape recorder, or other line-level audio device to send the instrument’s output signal to that device. The internal speakers are automatically shut off when a plug is inserted into this jack. The PHONES/OUTPUT jack also functions as an external output. NOTE • You can set the Master equalizer (EQ) which is provided to give you the best possible sound when listening through different reproduction systems. The Master equalizer (EQ) can be set in the Function settings (page 29 Function 013). CAUTION • Avoid listening with the headphones at high volume for long periods of time; doing so may not only result in ear fatigue, it may be damaging to your hearing. CAUTION • To prevent damage to the speakers, set the volume of the external devices at the minimum setting and turn power off the devices before connecting them. Failure to observe these precautions may result in electric shock or equipment damage. Also, be sure to set the volumes of all devices at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level. Connecting a footswitch The sustain function lets you produce a natural sustain as you play by pressing an optional footswitch. Plug the Yamaha FC4 or FC5 footswitch into the SUSTAIN jack and use it to switch sustain on and off. NOTE • Make sure that the footswitch plug is properly connected to the SUSTAIN jack before turning on the power. • Do not press the footswitch while turning the power on. Doing this changes the recognized polarity of the footswitch, resulting in reversed footswitch operation. Turn on the power Turn down the volume by turning the [MASTER VOLUME] control to the left and press the [ ] (Standby/On) switch to turn on the power. While playing the keyboard, adjust the volume level by using the [MASTER VOLUME] control. Pressing the [ ] (Standby/On) switch again turns the power off. CAUTION • When using a power adaptor, even when the power is off, a small amount of electricity is still being consumed by the instrument. When you are not using the instrument for a long time, make sure to unplug the AC power adaptor from the wall AC outlet, and/or remove the batteries from the instrument. Auto Power Off function To prevent unnecessary power consumption, this instrument features an Auto Power Off function that automatically turns the power off if the instrument is not used for approximately 30 minutes. To disable the Auto Power Off function While holding down the lowest key, press the [ ] (Standby/On) switch to turn on the power. Alternately select “Off” in the Function settings (page 30 Function 024). NOTE • Any settings will be restored to the factory default settings when the power is turned off. PSR-E233/YPT-230 Owner’s Manual Panel Controls and Terminals Front Panel q [ ] (Standby/On) switch..................................... page 9 w [MASTER VOLUME] control ................................ page 9 e [1 LISTEN & LEARN] button .............................. page 24 r [2 TIMING] button ............................................... page 24 t [3 WAITING] button ............................................ page 24 y LESSON PART [L] button ............................................................ page 25 [R] button ............................................................ page 25 u [METRONOME] button ....................................... page 27 i [TEMPO/TAP] button .......................................... page 27 o [SONG] button ............................................ pages 12, 22 !0 [VOICE] button ........................................... pages 12, 14 !1 [STYLE] button ........................................... pages 12, 16 !2 Number buttons [0]–[9], [+], [-] ......................... page 12 !3 [FUNCTION] button ............................................ page 28 !4 [DEMO/BGM] button .......................................... page 23 In the Song mode !5 [A-B REPEAT] button ......................................... page 26 !6 [REW] button ...................................................... page 22 !7 [FF] button .......................................................... page 22 !8 [PAUSE] button........................................
Ce manuel est également adapté pour les modèles :Synthétiseur / piano, - YPT-230 (4.02 mb)