Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Range of note numbers received = 0 (C-2)...60 (C3)...127 (G8) Velocity range = 1...127 (Velocity is received only for note-on) When the Multi Part parameter "RECEIVE NOTE MESSAGE" = OFF, that part will not receive these messages. For a drum part*, key-off is not received if the DrumSetup parameter RECEIVE NOTE OFF = OFF. For a drum part, key-on is not received if the DrumSetup parameter RECEIVE NOTE ON = OFF. * Drum Part indicates that the Multi Part parameter PART MODE is "set to DRUM, DRUMS1, DRUMS2." 1.2 Control changes These messages control volume or pan etc. Their functions are differentiated by the control number (Ctrl#). If the Multi Part parameter RECEIVE CONTROL CHANGE = OFF, that part will not receive control changes. 1.2.1 Bank Select This message selects the voice bank. Control# Parameter Data Range 0 Bank Select MSB 0, 63, 64, 126, 127 (Normal voice, Native voice, SFX voice, SFX kit, Drum kit) 32 Bank Select LSB 0...127 The Bank Select data will be processed only after a Program Change is received, and then voice bank will change at that time. If you wish to change the voice bank as well as the voice, you must transmit Bank Select and Program Change messages as a set, in the order of Bank Select MSB, LSB, and Program Change. Not received when Receive Bank Select in Native System Parameters is set to off. 1.2.2 Modulation This message is used primarily to control the depth of vibrato, but the depth of the following 7 types of effect can be controlled. The effect of this message can be changed by the following parameters. • Multi Part Parameter 1. MW PITCH CONTROL 2. MW FILTER CONTROL 3. MW AMPLITUDE CONTROL 4. MW LFO PMOD DEPTH 5. MW LFO FMOD DEPTH 6. MW LFO AMOD DEPTH • Effect1 Parameter 7. MW VARIATION CONTROL DEPTH (Valid when Variation Effect is assigned to a part as Insertion) Control# Parameter Data Range 1 Modulation 0...127 If the Multi Part parameter RECEIVE MODULATION = OFF, that part will not receive Modulation. 1.2.3 Portamento Time This message controls the degree of Portamento (refer to 1.2.9). Control# Parameter Data Range 5 Portamento Time 0...127 When Portamento (control number 065) is ON, this regulates the speed of the pitch change. If the receive channel is a drum part, Portamento Time is not received. 1.2.4 Data Entry This message sets the value of the parameter which was specified by RPN MSB/LSB (see 1.2.26) and NRPN MSB/LSB (see 1.2.25). Control# Parameter Data Range 6 Data Entry MSB 0...127 38 Data Entry LSB 0...127 1.2.5 Main Volume This message controls the volume of each part. This is used to adjust the volume balance between parts. Control# Parameter Data Range 7 Main Volume 0...127 (no sound...max.) When the Multi Part parameter RECEIVE VOLUME = OFF, that part will not receive Main Volume. 1.2.6 Panpot This message control the panning (stereo location) of each part. Control# Parameter Data Range 10 Pan 0...64...127 (left...center...right) When the Multi Part parameter RECEIVE PAN = OFF, that part will not receive Panpot. 1.2.7 Expression This message controls expression (dynamics within a musical line) for each part. It is used to create volume changes during a song. Control# Parameter Data Range 11 Expression 0...127 (no sound...max.) If the Multi Part parameter RECEIVE EXPRESSION = OFF, that part will not receive Expression. 1.2.8 Hold1 This message controls sustain pedal on/off. Control# Parameter Data Range 64 Hold1 0...63,64...127 (OFF, ON) When this is ON, currently-sounding notes will continue to sound even if note-off messages are received. If the Multi Part parameter RECEIVE HOLD1 = OFF, that part will not receive Hold1. 1.2.9 Portamento This message controls portamento on/off. Control# Parameter Data Range 65 Portamento 0...63,64...127 (OFF, ON) When this is ON, the pitch will change smoothly between notes. The time over which the pitch changes is adjusted by Portamento Time (see 1.2.3). Also, when the Multi Part parameter MONO/POLY MODE = MONO, the tone will also change smoothly (legato) if Portamento = ON. If any of the following Multi Part parameter settings apply, that part will not receive Portamento. • RECEIVE PORTAMENTO = OFF • PART MODE=DRUM, DRUMS1, 2 1.2.10 Sostenuto This message controls sostenuto pedal on/off. Control# Parameter Data Range 66 Sostenuto 0...63,64...127 (OFF, ON) If sostenuto is turned on while a note is sounding, that note will be sustained until sostenuto is turned OFF. Sostenuto for the specified part is not received when RECEIVE SOSTENUTO of the part in Multi Part Parameters is set to off. 1.2.11 Soft Pedal This message controls soft pedal on/off. Control# Parameter Data Range 67 Soft Pedal 0...63,64...127 (OFF, ON) The sound will become mellower when Soft Pedal is ON. If any of the following Multi Part parameter settings apply, that part will not receive the Soft Pedal. • RECEIVERECEIVE SOFT PEDAL=OFF • PART MODE=DRUM, DRUMS1/2 1.2.12 Harmonic Content This message adjusts the resonance of the filter that is specified for the...