Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Synthétiseur / piano, - S80 (24.93 kb)
Synthétiseur / piano, - S80 (259.23 kb)
Synthétiseur / piano, - S80 (956.2 kb)
Facilité d'utilisation
Settings: all (all data), all-vioce, chain (Sequence Chain), plugin, other To delete a directory, delete any files within that directoryand then delete the directory itself. Details about File Types are given on Page 143. 1Use Knob [B] to select the File Type and Knob [C] to select the File Number. 2When you press the [ENTER] key, you will see a confirmation message. 3Press the [INC/YES] key to delete the file. The message “Completed.” will be displayed after it has been deleted, and you will be returned to the previous screen. The delete operation will be canceled if you press the [DEC/NO] key during execution. 146 MkDir (Make Directory) Format Before you can use a new Memory Card with th MkDir (Make Directory) Format Before you can use a new Memory Card with the directories within existing ones). This allows you to synthesizer, you will need to format it. store files in separate directories according to File Type. Format) Press Card [ENTER] MkDir) /VOICEDIR/SUBDIR-1/ A-? Cursor Card Dir:***[NEWDIR-3] Directory Name The directory hierarchy can have up to 27 levels. You cannot create a directory with the same name as one that already exists. The hierarchy display (directory path) will not be shown if the Memory Card has no directory other than the “root” directory. 1Use Knob [C] to select an existing directory and repeat until you have reached the level in the hierarchy at which you wish to create a new directory. 2To create a new directory, use Knob [2] to move the cursor. Then use Knob [1] or the [DATA] knob and [DEC/NO] and [INC/YES] keys to enter the new directory name. The procedure for renaming files is basically the same as for renaming Voices. However, you cannot use symbols or lower case characters. Details about renaming Voices are given on Page 70. Directory names can only be up to 8 characters long. 3Press the [ENTER] key to create the directory. The message “Completed” will be displayed after it has been created, and you will be returned to the previous screen. Directories are denoted by “Dir” next to the directory name. To open a subdirectory, use Knob [C] to move the cursor to it and press the [ENTER] key. All the files in the subdirectory are displayed. If you select File Number 000, “up dir” will be displayed. By pressing the [ENTER] key, you will be returned to the parent directory (i.e., moved up one directory level). Insert a new Memory Card into the CARD slot. When you press the [ENTER] key, you will see a confirmation message. Press the [INC/YES] key to start formatting the Card. You will see the “Executing...” message while the Card is being formatted. If there is already data on the Memory Card, it will be completely lost when you format it. Do not remove the Memory Card while it is being formatted, since this could result in damage to the synthesizer and the card. After formatting, an EXT Memory file will automatically be created. During this process, the message “Now saving...” will be displayed. Card 147 About the Plug-in Boards (Optional) About the Plug-in Boards (Optional) l PLG150-AN l PLG150-PF l PLG100-XG l PLG150-VL l PLG150-DX l PLG100-VH nSee page 32 for detailed explanations for each board. Available slot (PLG1, PLG2) differs depending on the type of the Plug-in boards. Please take it into consideration before installation. PLG1/PLG2 Single-part Plug-in Boards (PLG150-AN, PLG150-PF, PLG150-VL, PLG150-DX) PLG1 only Effect Plug-in Board (PLG100-VH) PLG2 only Multi-part Plug-in Board (PLG100-XG) How to Install the Optional Plug-in Board 1 Turn the keyboard power off, and disconnect the power cord. Also, if the keyboard is connected with other external device(s), disconnect the device(s). 2 Move to a position facing the rear panel of the keyboard, and remove the screws from the Plug-in board cover at the bottom center side with a coin or a Phillips screwdriver (three SILVER screws only). Do not remove the other screws. nAlthough the PLG100-VL and PLG100-DX can also be installed, some of the functions are not available. nKeep the removed screws in a safe place. They will be used when attaching the Plug-in board cover to the keyboard again. 3 Remove the Plug-in board cover by pulling it to your side. Precautions When Installing The plate incorporated with the Plug-in board cover will the Optional Boards appear. The plate can accommodate two Plug-in boards, on its top and bottom: PLG1 (top) and PLG2 (bottom). Remember the following precautions and install the Plug-in boards properly by following the steps as written. • Handle the Plug-in boards with care. Dropping or subjecting the Plug-in board to any kind of shock may cause damage or result in a malfunction. • Be careful of static electricity. There are times when static electricity affects the IC chips on the Plug-in board. Before you lift the optional Plug-in board, to reduce the possibility of static electricity, touch the metal parts other than the painted area or a ground wire on the devices that are grounded. Those two c...