Évaluations - 0, GPA: 0
(
)
)
|
Photos et spécifications Yamaha P-45 |
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
MIDI Data Format / MIDI-Datenformat /
Format des données MIDI / Formato de datos MIDI
1. NOTE ON/OFF
3. MODE MESSAGES
Data format: [9nH] -> [kk] -> [vv]
Data format: [BnH] -> [cc] -> [vv]
9nH = Note ON/OFF event (n = channel number)
BnH = Control event (n = channel number)
kk =
Note number (Transmit: 09H–78H = A-2–C8 /
cc =
Control number
Receive: 00H–7FH = C-2–G8)
vv =
Data Range
vv =
Velocity (Key ON = 01H–7FH, Key OFF = 00H)
(1) All Sound Off
Data format: [8nH] -> [kk] -> [vv] (reception only)
ccH
Parameter
Data Range (vvH)
8nH = Note OFF event (n = channel number)
78H
All Sound Off
00H
kk =
Note number: 00H–7FH = C-2–G8
(2) Reset All Controllers
vv =
Velocity
ccH
Parameter
Data Range (vvH)
79H
Reset All Controllers
00H
2. CONTROL CHANGE
Resets controllers as follows.
Data format: [BnH] -> [cc] -> [vv]
Controller
Value
BnH = Control change (n = channel number)
Pitch bend
±0
cc =
Control number
Modulation
0 (OFF)
vv =
Data Range
Expression
127 (Max)
(1) Bank Select
Sustain
0 (OFF)
ccH
Parameter
Data Range (vvH)
Portamento Control
Cancels the Portamento Source
00H
Bank Select MSB
00H:Normal
Key Number that was received.
20H
Bank Select LSB
00H...7FH
RPN
Number not specified; internal data
Bank selection processing does not occur until receipt of next
will not change.
Program Change message.
(3) Local Control (reception only)
(2) Modulation (reception only)
ccH
Parameter
Data Range (vvH)
ccH
Parameter
Data Range (vvH)
7AH
Local Control
00H (off), 7FH (on)
01H
Modulation
00H...7FH
(4) All Notes Off
(3) Main Volume
ccH
Parameter
Data Range (vvH)
ccH
Parameter
Data Range (vvH)
7BH
All Notes Off
00H
07H
Volume MSB
00H...7FH
Switches OFF all the notes that are currently ON on the specified
channel. Any notes being held by the sustain or sostenuto pedal
(4) Panpot (reception only)
will continue to sound until the pedal is released.
ccH
Parameter
Data Range (vvH)
0AH
Panpot
00H...7FH
(5) Omni Off (reception only)
ccH
Parameter
Data Range (vvH)
(5) Expression
7CH
Omni Off
00H
ccH
Parameter
Data Range (vvH)
Same processing as for All Notes Off.
0BH
Expression MSB
00H...7FH
(6) Omni On (reception only)
(6) Damper Pedal/Sustain
ccH
Parameter
Data Range (vvH)
ccH
Parameter
Data Range (vvH)
7DH
Omni On
00H
40H
Sustain MSB
00H...7FH
Same processing as for All Notes Off.
(7) Sostenuto (reception only)
(7) Mono (reception only)
ccH
Parameter
Data Range (vvH)
ccH
Parameter
Data Range (vvH)
42H Sostenuto
00H...3FH:off,
40H...7FH:on
7EH
Mono
00H
(8) Soft Pedal (reception only)
Same processing as for All Sound Off.
ccH
Parameter
Data Range (vvH)
(8) Poly (reception only)
43H
Soft Pedal
00H...3FH:off, 40H...7FH:on
ccH
Parameter
Data Range (vvH)
(9) Effect1 Depth (Reverb Send Level)
7FH
Poly
00H
ccH
Parameter
Data Range (vvH)
Same processing as for All Sound Off.
5BH
Effect1 Depth
00H...7FH
• When Control Change is turned OFF, Control Change messages
Adjusts the reverb send level.
will not be transmitted or received.
(10) Effect3 Depth (Chorus Send Level)
• Local on/off, OMNI on/off are not transmitted. (The appropriate note
ccH
Parameter
Data Range (vvH)
off number is supplied with “All Note Off” transmission).
5DH
Effect3 Depth
00H...7FH
• When a voice bank MSB/LSB is received, the number is stored in
the internal buffer regardless of the received order, then the stored
(11) RPN
value is used to select the appropriate voice when a program
65H
RPN
MSB
change message is received.
64H
RPN
LSB
• Poly mode is always active. This mode will not change when the
06H
Data Entry
MSB
instrument receives a MONO/POLY mode message.
26H
Data Entry
LSB
60H
Data
Increment
61H
Data
Decrement
* Parameters that are controllable with RPN:
• Coarse Tune
• Fine Tune
• Pitch Bend Range
2
P-45 MIDI Reference / MIDI-Referenz / Référence MIDI / Referencia MIDI
...