Évaluations - 3, GPA: 4.3
(
)
)
|
Facilité d'utilisation
C E D A A B D Power Blower AttAchment oPerAtor's mAnuAl operatIon WARNING Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit. Blower housing may contain shredder blades and other sharp edges that can cause serious injuries if touched, even if engine is off and blades are not moving. Wear gloves to protect hands from sharp edges and hot surfaces. operatIng blower WARNING Always wear safety glasses, hearing protection and a face fil- ter mask or serious personal injury may result. Do not point the blower pipe in the direction of people or pets. Read the Safety Section carefully. IMPORTANT To avoid engine damage due to over-revving, do not block blower pipe. 1. Use only during appropriate hours. IMPORTANT Use reduced speed only when performing light-duty tasks or to comply with local noise regulations. Continuous low speed operation may allow fuel/oil residue to build-up on the piston and cause rapid build-up of carbon on the spark arrestor screen, resulting in overheating and engine damage. To reduce harmful build-up, run engine at wide open throttle for at least 5 minutes every hour, and inspect/clean the spark arrestor screen after approximately 40 hours of operation. 2. Control blower speed with throttle trigger. 3. Use lower speed to blow debris from hard surfaces. 4. Additional speed may be necessary to clean debris, snow, etc. from lawns and flowerbeds. NOTE Never use a higher speed setting than necessary to perform a task. Remember, the higher the engine speed, the louder the blower noise. Minimize dust by using blower at lower speeds. Keep debris on your property. Be Smart - be a good neighbor. 10 10 maIntenance WARNING Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Wear gloves to protect hands from sharp edges and hot surfaces. Your ECHO product is designed to provide many hours of trouble free service. Regular scheduled maintenance will help achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your unitto an ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOURSELF or have the ECHO Dealer do it, each maintenance task has been graded. skIll levels Level 1 = Easy to do. Common tools may be required. Level 2 = Moderate difficulty. Some specialized tools may be required. maIntenance Intervals Component Maintenance Procedure Skill Level Interval Screws/Nuts/Bolts Inspect/Tighten/Replace 1 Before Each Use Power Blower AttAchment oPerAtor's mAnuAl storage 1. Store Power Blower attachment in a dry, dust free place out of the reach of children, using supplied storage hook. Storage Hook Installation 1. Insert small end of hook into locating hole on attachment shaft. 2. Slide plastic cap onto end of attachment shaft. specIfIcatIons MODEL ----------------------------------------------------Power Blower Attachment Length -------------------------------------------------------635 mm (25.01 in.) Width --------------------------------------------------------231 mm (9.10 in.) Height -------------------------------------------------------212 mm (8.35 in.) Weight -------------------------------------------------------1.76 kg (3.89 lbs.) Drive Shaft--------------------------------------------------6.35 mm (1/4 in.) Flex Shaft Maximum Air Speed (MPH) -----------------------------100 - 115 mph* Maximum Air Volume ------------------------------------317 - 364 cu. ft./min.* Sound Level at 50 ft. dB(A) scale per ANSI B175.2 -71 dB(A) * Specifications are for a variety of power heads. Individual unit performance may vary. servIcIng InformatIon parts/serIal number Genuine ECHO Parts and ECHO REPOWER™ Parts and Assemblies for your ECHO products are available only from an Authorized ECHO Dealer. When you do need to buy parts always have the Model Number and Serial Number of the attachment with you. You can find these numbers on the driveshaft model/serial number label. For future reference, write them in the space provided below. Model No. _________________SN. ___________________ servIce Service of this product during the warranty period must be performed by an Authorized ECHO Service Dealer. For the name and address of the Authorized ECHO Service Dealer nearest you, ask your retailer or call: 1-800-432-ECHO (3246). Dealer information is also available on our Web Site. When presenting your unit for Warranty service/repairs, proof of purchase is required. echo consumer product support If you require assistance or have questio...