Log:
Évaluations - 2, GPA: 4 ( )

Instructions Husqvarna, Modèle 170BT

Fabricant : Husqvarna
Taille : 2.35 mb
Nom Fichier : HOEN2006_1150197-26.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


6. In the event that any part must be replaced or any maintenance or repair work not described in this manual must be performed, please contact the nearest Husqvarna servicing dealer for assistance. 7. Do not use any accessory or attachment other than those bearing the Husqvarna mark and recommended for the unit. 8. Under no circumstances should you ever take apart the product or alter it in any way. Doing so might result in the product becoming damaged during operation or the product becoming unable to operate properly. TRANSPORTATION • Drain the fuel from the fuel tank before transporting or storing the blower. • Secure the blower so that it does nor receive damage from shock doing transportation. • Do not apply strong forces to the blower, such as throwing it or dropping it. Doing so in validates the warranty. STORAGE • When storing the blower, choose a space indoors free from moisture and out of the reach of children. Safety Precautions English 8 1. Frame 2. Shoulder Strap 3. Spark Plug Cap 4. Throttle Lever 5. Net 6. Choke Lever 7. Air Cleaner 8. Volute Case 9. “CAUTION” Label 10.Elbow 11.Fuel Tank 12.Recoil Starter 13.Ignition Switch 14.Engine Cover 15.Handle Bar (Accessory) 16.Fan 16 7 3 8 11 15 1 2 5 6 12 14 10 13 4 9 .. DISPOSAL When disposing your machine, fuel or oil for the machine, be sure to allow your local regulations. Frame: PE (Polyethylene) Shoulder strap: Chemical fiber Throttle lever: Metal, Plastic Volute case, Volute cover, Engine cover: PA66GF (Glass-reinforced nylon), Brass Pad: Chemical fiber Hose: EVA (Ethylene vinyl acetate) Pipes: PP (Polypropylene) Fan: PA66GF (Glass-reinforced nylon) Element: Paper, Urethane * The insert nut of volute case, volute cover and fan can be taken off. What is what? English Technical data MODEL 170BT Dimensions (L x W x H) mm (in) 365x464x485 (14x18x19) Dry Weight kg (lbs) (including pipe) 12 (26.5) (total weight) Fuel Tank Capacity liter (fl. oz) 1.75 (60.0) Engine Type Air cooled 2-cycle gasoline engine Piston Displacement cu. cm (cu. in) 64.9 (4.0) Air Filter 2-stage fresh flow filter system Carburetor (Diaphragm) valve type Rotary Ignition System Digital Ignition Spark Plug NGK CMR7H (Noise-proof) Muffler Spark arrester equipped Idle speed rpm 2000 Operating Engine Speed rpm 2000 to 6900 Fuel Consumption liter/h (fl. oz/h) 1.6 (54.1) Average Air Volume (w/std Pipe) cu. m/min (cf/m) 16 (565) Max. Air Velocity m/sec (mph) (Average) 78 (175) Durability Period hrs. 300 Noise Level (50 Feet ANSI B175. 2002) dB(A) 76 Sound power level EC directive 2000/14/EC, measured dB (A) 110 Sound power level EC directive 2000/14/EC, guaranteed dB (A) 110 Noise pressure level at the operator’s ear EN/ISO11806 and ISO7917 dB (A) 95 Vibration level at idle, right handle EN/ISO11806 and ISO7916 m/s2 0.8 Vibration level at max, speed, right handle EN/ISO11806 and ISO7916 m/s2 3.9 * The data shown above are those in the case of one straight pipe. * Specifications are subject to change without notice. English Assembly • SWIVEL JOINT 1. Connect the blower and swivel joint with flexible hose. Clamp both ends of the flexible hose securely with the hardware supplied with the unit. • THROTTLE LEVER 1. Set up the throttle holder to the swivel and tighten the screw on the holder. When setting up the holder, please make sure to match the holder to the convex on the swivel joint as shown in F2. 2. Adjust the position and angle to achieve a comfortable working position, and tighten the throttle lever. (1) Cable (2) Hose • THROTTLE CABLE • Use the clamp to fasten the colgate tube containing the throttle cable and the power cable to the hose. (1) Clamp • HANDLEBAR [OPTION] 1. Insert the holder, then assemble the handlebar (OPTION) and tighten it securely. • BLOWER TUBES 1. Align the protrusion and the groove provided on the tube ends and twist the tube until the connection is locked. NOTE A light lubricant may be used to ease assembly of flexible pipe to blower elbow. NOTE If longer tube is required, the second straight pipe can be connected with the first one. F1 (1) (2) F2 F3 (1) F4 F5 F6 English Assembly • HARNESS NOTE The harness must always be worn when working with the machine. Failure to do so means you will be unable to maneuver safely and this can result in injury to yourself or others. A correctly adjusted harness and machine significantly facilitates the work. Adjust the harness to give the best working position. Tighten the side straps so that the pressure is evenly distributed across the shoulders. • WAIST BELT • The waist belt is attached to the rings on the left and right sides of the frame. Place the waist belt over your waist and not too far down on the stomach. Tighten the waist belt strap so that you feel the weight of the blower resting on your hip. • Be sure to always tighten the buckle in front of your body. WARNING • If you are not using a waist belt, be sure to remove it from the unit and store it. • There is a risk that the belt will be caught, toppling the ...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories