Log:
Évaluations - 4, GPA: 4.8 ( )

Instructions Weed Eater, Modèle 530087893

Fabricant : Weed Eater
Taille : 164.68 kb
Nom Fichier : WOUS2000_530087893.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


D Never run unit without the proper equipment attached. When using your unit as a blower, always install blower tubes. D Check air intake opening and blower tubes, frequently, always with engine stopped and spark plug disconnected. Keep vents and discharge tubes free from debris which can accumulate and restrict proper air flow and cause damage to the unit. D Never use for spreading chemicals, fertilizers, or other substances which may contain toxic materials. D To avoid spreading fire, do not use near leaf or brush fires, fireplaces, barbecue pits, ashtrays, etc. D To reduce the risk of hearing loss associated with sound level(s), hearing protection is required. D To reduce the risk of injury associated with contacting rotating parts, stop the engine before installing or removing attachments. Do not operate without guard(s) in place. D Use only for jobs explained in this manual. MAINTAIN YOUR UNIT PROPERLY D Have all maintenance other than the recommended procedures described in the Operator’s Manual performed by an Authorized Service Dealer. D Disconnect spark plug before performing maintenance except for carburetor adjustments. D Use only recommended Weed Eater. parts; use of any other parts may void your warranty and cause damage to your unit. - -- D Empty the fuel tank before storing the unit. Use up fuel left in carburetor by starting the engine and letting it run until it stops. D Do not use any accessory or attachment other than those recommended by the manufacturer for use with your unit. D Do not store the unit or fuel in a closed area where fuel vapors can reach sparks or an open flame from hot water heaters, electric motors or switches, furnaces, etc. D Store in a dry area out of reach of children. SPECIAL NOTICE: For users on U.S. Forest Land and in some states, including Cali- fornia(Public Resources Codes 4442 and 4443), Idaho, Maine, Minnesota, New Jersey, Oregon, and Washington: Certain internal combustion engines operated on forest, brush, and/or grass covered land in the above areas are required to be equipped with a spark arrestor, maintained in effective working order, or the engine must be constructed, equipped, and maintained for the prevention of fire. Check with your state or local authorities for regulations pertaining to these requirements. Failure to follow these requirements is a violation of the law. This unit is not factory equipped with a spark arrestor; however, a spark arrestor is available as an optional part. If a spark arrestor is required in your area, contact an Authorized Service Dealer for the correct kit. The spark arrestor, blower tubes, and nozzles must be assembled to unit to be in full compliance with regulations. SPECIAL NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnormal swelling. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti-vibration system does not guarantee the avoidance of these problems. Users who operate power tools on a continual and regular basis must monitor closely their physical condition and the condition of this tool. ASSEMBLY NOTE: It is normal for the fuel filter to rattle in the empty fuel tank. ASSEMBLY WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure. D No tools are required for assembly. --3 BLOWER TUBE D Push the blower tube into the blower outlet until it snaps into place. Blower Outlet Blower Tube USING YOUR UNIT You MUST make sure the tube is secure before using the unit. EyeProtectionOPERATINGPOSITION OPERATING TIPS S Operate power equipment only at reasonable hours- --not early in the morning or late at night when people might be disturbed. Comply with times listed in local ordinances. Usual recommendations are 9:00 a.m. to 5:00 p.m., Monday though Saturday. S To reduce noise levels, limit the number of pieces of equipment used at any one time. S Use rakes and brooms to loosen debris before blowing. S In dusty conditions, slightly dampen surfaces when water is available. S Conserve water by using power blowers instead of hoses for many lawn and garden applications, including areas such as gutters, screens, patios, grills, porches, and gardens. S Watch out for children, pets, open windows, or freshly washed cars. Blow debris away safely. S Use the full blower nozzle extension so the air stream can work close to the ground. S After using blowers and other equipment, CLEAN UP! Dispose of debris in trash receptacles. - -- FUELING This engine is certified to operate on unleaded gasoline. Gasoline must be mixed with a good quality 2-cycle air-cooled en...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories