Évaluations - 0, GPA: 5
(
)
)
|
Facilité d'utilisation
– Do not blow towards people, cars, windows, or other items which could be injured or damaged by the blown debris. – Keep hands away from the blower air intake and outlet. STARTING – Start according to instructions in this manual or on the machine. – Do not change engine governor settings or overspeed the engine. Operating the engine at excessive speed can increase the hazard of personal injury. INTERRUPTING OPERATION - Before leaving the operator's position: - Park on level ground. - Shut off the engine. - Stop the engine, and wait until the fan stops moving: - before refueling; - Stop the engine, and disconnect the spark plug wire(s): - before clearing blockages; - before checking, cleaning or working on the machine; - if the machine begins to vibrate abnormally: shut off machine immediately. Inspect and have repairs made as needed before restarting; - except for repairs or adjustments as specifically noted, such as for carburetor adjustment, where the engine must be running. Keep hands and feet clear of moving parts in these circumstances. - Allow the fan to come to a complete stop when stopping operation to clear blockages, unclog, inspect the machine, do maintenance or repair. - Reduce the throttle setting during engine shut- down and, if the engine is provided with a shut- off valve, turn the fuel off at the conclusion of operation. OPERATING ON SLOPES USE EXTRA CARE WHEN OPERATING ON SLOPES. EVALUATE THE RISKS INVOLVED BEFORE OPERATING ON A SLOPE . - Slopes are a major factor related to slip and fall accidents that sometimes lead to severe injury or death. All slopes require extra caution. - Do not operate on slopes if uneasy or uncertain. Ultimate responsibility for safe operation on slopes rests with the operator. - Do not operate on steep slopes. Poor footing could cause a slip and fall accident. - Keep all movement on slopes slow and gradual. - Do not operate near drop-offs, ditches or embankments. You could lose your footing or balance. - Do not turn on slopes unless necessary, and then turn slowly and downhill when possible. - Be sure of your footing on slopes. - Watch for holes, ruts, bumps, rocks and other hidden objects. Uneven terrain could cause a slip and fall accident. Tall grass can hide objects. SAFETY MAINTENANCE SAFETY In general - Maintain machine according to manufacturer's schedule and instructions for maximum safety and best results. - Park machine on level ground. - Never allow untrained personnel to service machine. - Guards should only be removed by a qualified technician for maintenance or service. - Adjust or repair only after the engine has been stopped and the fan has stopped moving. - Disconnect spark plug wire(s) before doing any maintenance. - Replace parts if worn, damaged or faulty. For best results, always replace with parts recommended by the manufacturer. - Do not dismantle the machine without releasing or restraining forces which may cause parts to move suddenly. - Provide adequate support, e.g. jack st...
Ce manuel est également adapté pour les modèles :Les systèmes de ventilation - OPTIMAX 4/1/1970 (1.69 mb)
Les systèmes de ventilation - OPTIMAX 3/1/2000 (1.69 mb)
Les systèmes de ventilation - OPTIMAX 3/1/1970 (1.69 mb)
Les systèmes de ventilation - OPTIMAX 2/1/1990 (1.69 mb)