Log:
Évaluations - 2, GPA: 4 ( )

Instructions Panasonic, Modèle DP4510

Fabricant : Panasonic
Taille : 9.26 mb
Nom Fichier : DP6010-FAX.PDF
Langue d'enseignement: entr
Aller à la télécharger



Par ce dispositif a également d'autres instructions :

Facilité d'utilisation


(See note 1) P Rotation XMT The portion labeled "P" that exceeds the standard document Direction size is not sent. NOTE 1. When an oversized original is sent to another machine, sometimes, it is reduced in accordance with the other party's recording paper size. Ex: A3 size Letter size 17 Basic Transmission Settings General Description AUG-15-2002 15:00 0% Ready to fax Original set You can temporarily change the transmission settings either before or after you place the document on the ADF. These settings are as follows: • Contrast • Resolution • Original (Text/Photo) •Stamp • Duplex Scan After your document(s) have been sent, your machine will automatically return to the preset settings. Contrast Your machine is preset to Normal contrast. If you wish to send a document with lighter contrast, change the setting to Lighter. If you wish to send a document with darker contrast, change the setting to Darker. Lighter Normal Darker LIGHTER DARKER Basic Transmission Settings Resolution Your machine is preset to Standard resolution, which is suitable for most documents. Use Fine or Super Fine for detailed documents. for standard originals STD for detailed originals FINE for finer detailed originals S-FINE for 600 dpi detailed originals 600 dpi NOTE 1. To change the preset Contrast position, change the setting of Fax Parameter No. 01. (See page 188) 2. To change the preset Resolution position, change the setting of Fax Parameter No. 02. (See page 188) 3. If you send a photographic original with gray tones, set the Resolution to Fine or S-Fine (406 x 391 dpi) and the Original setting to Text/Photo or Photo. The reproduction of the received document will be determined by the capability of the remote station. Before Starting 19 Basic Transmission Settings Original (Text/Photo) The Original setting is useful when sending photographs or illustrations with gray tones. Your machine is preset to "TEXT". You can select either "TEXT/PHOTO" or "PHOTO" mode. for text only originals TEXT for text and photo originals TEXT/PHOTO for photo or illustration originals PHOTO Others NOTE Sending 2-Sided Original(s) 2-Sided scanning selection control is available for the user depending on the original layout. The following selections are available for the 2-Sided scanning option: • Long Edge : 2-Sided scanning aligned to the long edge of the original. • Short Edge: 2-Sided scanning aligned to the short edge of the original. Verification Stamp • Confirms successful transmissions by stamping the bottom of each successfully transmitted page with a small mark. You or a selected party can be notified with a Job Completion Notice via a pop up screen on your/ their PC when the Copy Job or the Print Job is completed. You must setup the Job Completion Notice feature prior to starting the job and properly setup the Status Monitor. Confirms the commication status. Retrieving the Email temporarily. 1. When you select TEXT/PHOTO, or PHOTO, you machine will automatically select Fine Resolution. 2. When you store a document in memory, the Verification Stamp will stamp on the document if it is successfully stored in memory. In this case the Verification Stamp is not a confirmation that the document was successfully transmitted. If you wish to disable the use of the Verification Stamp when storing document in memory, change the setting of Fax Parameter No. 28. (See page 189) 3. To change the preset Verification Stamp position, change the setting of Fax Parameter No. 04. (See page 188) 2-SIDED ORIGINAL X-STAMP COMPLETION NOTICE COMM. STATUS GET EMAIL Sending Documents Clear Key Stop Key 2 345 Press the Press the MODE Select the Press START FAX/EMAIL Key SETTING Button SEND MODE or adjust the desired Parameter(s) Place original(s) 1a Place original(s) face up on the ADF. 1b or 1 2 Place a book or an original face down on the Platen Glass. Press ORIGINAL SIZE to select the original size. 2 Press FAX/EMAIL Key. 1 i-ADF Face-Up Mode Setting Button 3 Select the Mode(s) Set the SEND MODE or desired Parameter(s), if necessary. (See page 18) • Resolution • Send Mode • 2-SIDED ORIGINAL •X-STAMP MODE SETTING AUG-15-2002 15:00 0% Ready to fax AFRICA ASIA AMERICA ANTARTICA APOLLO BERLIN BRAZIL AUG-15-2002 15:00 0% Ready to fax ORG.SIZE = LTR 21 Before Starting Sending Documents 4 4 Select either ADDRESS BOOK DIALING or MANUAL NUMBER DIALING. 1. ADDRESS BOOK DIALING Telephone numbers or Email addresses or Email addresses should be registered in advance. (See page 178) 2. MANUAL NUMBER DIALING Facsimile: Enter the telephone number. Ex: 5 5 5 1 2 3 4 Email: Enter the Email address using the QWERTY KEYBOARD. Ex: abc@panasonic.com 5 The document(s) will be stored into memory. Confidential poll PANASONIC 5551234 PANASONIC QUALITY DEPT Aug-15-2002 15:00 0% Ready to fax Original set AFRICA ASIA AMERICA ANTARTICA APOLLO BERLIN BRAZIL Enter adr(TO) STN(s):000 abc@panasonic.com panasonic.com mgcs.co.jp abc-net.wxy.com host.pana.com NOTE 1. To utilize the above functions, your ma...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories