Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
— Accidental spillage of liquid into the unit may cause severe damage. If this occurs, turn the unit off, unplug the power cord and call for service. Do not place books, paper, or other items on the unit. Do not place the unit in an area where there is a lot of smoke, dust, chemical fumes or vibration. Ex : Thinner f Ex: fg) Do not leave the power cord plugged into the AC outlet if the unit is not used for an extended period. Do not place the unit on an uneven or unstable surface. . ^ 0 Do not disassemble this unit. This will void the warranty. Let two persons carry the unit when moving it. O Jj^j Do not look directly at the light. (You may damage your eyes.) ^ D°cumer|t • Special care should be taken to protect the unit if it is used in a less than optimum environment, such as a dusty or sandy area. Precautions Operating Environment Do not place the unit in direct sunlight or in a cold draft. Hot Cold Do not operate or place the unit in a vertical position. 0 Do not place the unit near a heating appliance or an air conditioning vent. Do not place the unit in a room with extremely high or low humidity. Do not place the unit near other appliances which generate large electrical noise. 0 Do not place the unit on a carpet. (Static electricity can cause the unit to malfunction.) Do not drink or inhale the included roller cleaning paper fluid. The roller cleaning paper may be harmful to sensitive skin, so please use protective gloves. Do not use the roller cleaning paper near a heater or open flame. This may cause a fire. 0 • Power Source • Use a voltage level that does not vary more than ±10% from the voltage level marked on the nameplate (located on the back side of the scanner). • Do not use an extension cord. • This scanner should be connected to a grounded outlet. • Do not use a line conditioner, transient suppressor or surge protector. Component Identification Hopper ADF door release Inside the ADF door. ADF door Manual feed selector Document guide Front door Exit substopper Front door release Inside the front door. Exit document stopper Hopper extension tray Power switch I : on position O : off position AC inlet Fan exhaust vent Document cover Display panel When performing each setting, used to display the scanning conditions, etc. Power indicator When the power is turned on, the green indicator lights. When an error occurs, the indicator will change to red, and light steadily or flash. Imprinter door (Top door) Used for attaching the imprinter unit and ink cartridge. Connectors Used to connect the scanner unit to a host computer. Power cord Component Identification CIS glass Scanning section glass 9 Display Panel Instructions The required settings must be selected prior to scanning. Information and conditions are shown on the LCD (Liquid Crystal Display). iDisplay panel and keys o COUNTER o IMPRINT o OTHERS o .¿HOME o STOP/START o Press to enter the scanning setting menu. Press to enter the counter setting menu. Press to enter the imprinter setting menu. Press to enter ''others" setting menu. Press to exit from the setting section and return to the ready status. Also, this function can change the display language. Press to start or stop scanning a document or batch of documents. LCD A ▼ ► Up to 32 characters can be displayed during scanning or setting. : Press to advance to the next mode in the selected menu. : Press to return to the previous mode in the selected menu. : Press to advance to the next value in the selected mode. ' Press to return to the previous value in the selected mode. Display Panel Instructions ■Setting the scanner The following parameters can be customized using the scanner's various setting modes. If the application software provides these features, it will be supported by the scanner. Scan menu Item Contents Front side brightness Selection for density when scanning the front side of a document. Front side image emphasis Selection for emphasis when scanning the front side of a document. Front side contrast Selection for contrast when scanning the front side of a document. Front side halftone Selection for gradation when scanning the front side of a document. Back side brightness (For KV-S6045W only) Selection for density when scanning the back side of a document. Back side image emphasis (For KV-S6045W only) Selection for emphasis when scanning the back side of a document. Back side contrast (For KV-S6045W only) Selection for contrast when scanning the back side of a document. Back side halftone (For KV-S6045W only) Selection for gradation when scanning the back side of a document. Noise reduction Selection for noise reduction when scanning a document. Double feed detection Selection to detect double feeding function. When scanning very important documents, confirm if the number of scanned pages displayed on the LCD matches the number of actual pages. Feed speed Selection for feed spee...