After finishing copying, press the Reset key to return to the initial screen of the current active mode. 90 Chapter 3 Other Features Reserving the Next Copy Job while the Current Copy Job is Progressing The next copy job can be reserved while the current copy job is under way. If Hard Disk Drive is not installed, this function is not available. (Hard Disk Drive is standard equipment for DP-C354/C264. It is optional equipment for DP-C323/C263/C213.) The previous copy job settings can be saved if

08/01/2006 08/01/2006 The date is printed on the bottom at the center. The date is printed on the bottom right side. The date is printed on the opposite side. Select the orientation of the original according to the orientation of its characters (vertical direction). Select the orientation of the original according to the orientation of its characters (horizontal direction). The cursor is displayed. 2 Move the cursor to the desired position using and . 3 Update the date with the Keypad. 5 Select

Refer to General Settings in the Operating Instructions (For Function Parameters) on the provided CD-ROM. The stapled copies are delivered to the saddle tray of the 1-bin saddle finisher as shown below: Blank Not copied on the cover. Copy Copied on the cover. Staple position Saddle tray 44 Chapter 2 More Menus Features 2Select a cover type. When “Blank” is selected as the cover type, up to 36 originals can be placed on the ADF. 3Select “Cover” to select a paper. When changing paper other than th

Key operations can change these values, refer to Copier Settings in the Operating Instructions (For Function Parameters) on the provided CD-ROM. 6 Select “OK”. 7 Enter the desired number of copies. 8 Press the Start key. Confirm the image quality of the copied papers. After finishing copying, press the Reset key to return to the initial screen of the current active mode. Chapter Basic 23 24 Chapter 1 Basic Menu Features Background Removal The original can be copied with the background color remo

2Press the Copy key if the machine is set to other function mode. 3Select the copy features (see pages 8 to 33 and 40 to 89). 34 Chapter 1 Basic Menu Features Storing a Job in Memory A copy job can be registered as a preset job. It is useful to register the frequently used settings as Preset jobs. Refer to the Recalling a Preset Job Stored in Memory (see page 35). Once registered, the copy job settings are kept in the job memory until they are overwritten by new settings. A proof copy job cannot

Сканирование/Файлы •После установки комплекта опционального комплекта Интернетфакса/устройства для работы с электронной почтой/сетевого сканера становится доступным сканирование изображений •Разрешение при сканировании до 600 dpi Печать •Встроенный цифровой контроллер печати обеспечивает печать с разрешением 300 или 600 dpi •Поддержка PCLпечати после установки опционального PCLконтроллера Прикладное программное обеспечение •Оболочка Document Manager •Программа просмотра документов Document Viewe

Installation and Relocation Do not position the unit in a location where it is unstable. Do not place the unit in a hot humid or dusty environment. Prolonged exposure to these adverse conditions may cause fire or electric shock. To prevent fire or shock hazard, do not expose this unit to rain or any type of moisture. When moving the unit, be sure to unplug the power cord from the AC outlet. If the unit is moved with the power cord attached, it can cause damage to the cord which could result in f

• Before operating this unit, please read these instructions completely and keep them carefully for future reference. • This unit is designed for installation by a qualified servicing dealer. Installation performed by non-authorized individuals could cause safety-related problems with the operation of this equipment. For U.S.A. only: • To locate the closest authorized dealer in your area, please call 1-800-449-8989. Stand is sold separately. Introduction Introduction n Thank you for purchasing t

3 Open the paper cover and insert ordinary Letter test paper, then close the paper cover. • Loading Copy Paper procedure (refer to the Operating Instructions on page 11) “ ” lights up. (Normal operation) (If not) Check copy paper. 4 Open the printer door. “ ” flashes. (Normal operation) (If not) *1 5 Close the printer door. “ ” lights up. (Normal operation) (If not) *1 6 Press . Press . Screen is fed. (Normal operation) The screen film surface is not fed smoothly. *1 There are strange noises. 7