DATE: 2I26I90 Section I - Product Identification Manufacturer's Name Xerox Corporation Manufacturer's Address Rochester, New York 14644 Product Designation 9200-II/9200-III W/O SORTER Section II - Electrical Information Line Voltage Line Current (Volts) (Amps) 208 or 240 N/A Emergency No. EH&S Inquiries (585) 422-2177 (800) 828-6571 Product Code 336, 362 Freq. Branch Cir. Protection (Hertz) (Amps) 60 30A & 50A (sole use recommended) Line Cord / Plug Specification Single Phase

DATE: 3/7/90 Section I - Product Identification Manufacturer's Name Xerox Corporation Emergency No. EH&S Inquiries (585) 422-2177 (8GG) 828-6571 Manufacturer's Address Rochester, New York 14644 Product Designation 9210 W/O SORTER Product Code F39, F40 Section II - Electrical Information Line Voltage Branch Cir. Protection (Volts) (Amps) 208 or 240 N/A (Hertz) 60 Line Current (Amps) 30A & 50A Sole Use Freq. (Sole Use Recommended) Line Cord / Plug Specification Single Phase 3

DATE: Emergency No. (585) 422-2177 0607 6/18/83 2/26/90 EH&S Inquiries (8GG) 828-6571 Manufacturer's Address Rochester, New York 14644 Product Designation 2300 Product Code 930 Section II - Electrical Information Line Voltage Line Current Freq. (Volts) (Amps) (Hertz) 115 9 60 Branch Cir. Protection (Amps) 15A Sole or Multi-use (sole use recommended) Line Cord / Plug Specification Single Phase 2 Wire + Ground NEMA 5-15R / 5-20R Power Consumption (Watts)* Running: 1,000 Sta

DATE: 0611 1/17/83 2/26/90 Emergency No. (585) 422-2177 EH&S Inquiries (800) 828-6571 Product Designation 2830 Product Code 19 Section II - Electrical Information Line Voltage (Volts) 115 Line Current (Amps) 20 Freq. (Hertz) 60 Branch Cir. Protection (Amps) 15A Multi-use Line Cord / Plug Specification Single Phase 2 Wire +Ground NEMA 5-15R / 5-20R Agency Approvals UL File Number E24014 CSA LR Number LR2196 / LR45955 Power Consumption (Watts)* Running: 1,380 Standby:

DATE: 04/02/07 Emergency No. EH&S Inquiries (585) 422-2177 (800) 828-6571 Product Identifier: System ZOC-1 IOT - FAR-8 Section II - Electrical Information Line Voltage (Volts) 120 - 127 Line Current (Amps) 12A Freq. Branch Cir. Protection (Hertz,) (Amps) 60 15A OR 20A Line Cord/Plug Specification Equipped with Appliance Coupler Detachable Power cord Two wire + ground NEMA Type 5-15P OR 5-20P Plug Power Consumption (Watts)* Running: 838 Standby: 247 Power Saver: 71 OFF/FEMP:

Space Requirements The diagram below is provided as a representation only of the space envelope required for installation of Xerox equipment. Diagram is a representation only and not drawn to scale. WIDTH DocuTech 61xx Representation only. DEPTH Note: The 6100, 6115, 6135 are available with and without a stand to support the controller. If a stand is ordered, it will be positioned to the left of the printer, within the service space envelope. If no stand is ordered, the controller will be placed

This space cannot be shared. • A minimum of 36 inches of clearance is required in the back of each component for general service clearance. Please ensure electrical, space, and supplies are available prior to equipment delivery. Physical requirements • The DocuSP Controller Monitor and Keyboard are designed to be positioned on top of the DocuTech 61XX printer. The controller platform is designed to either be mounted in a stand to the left of the printer, or to be positioned on the floor to the l

This stage may take up to 15 minutes, during which the progress will be indicated both on the CopyCentre screen and on the utilities tool. 6. Once the upgrade is complete, the Software Upgrade tool will display the Upgrade Status Report, which should display 'Software Upgrade Successful' against the different modules, with no failures. Some modules may show 'Software Upgrade Not Required'; this is normal. Close the tool by clicking on 'OK'. 7. The system will automatically reboot. The message

The CopyCentre will be unavailable during this time. Please make sure that the CopyCentre is free of faults and jams before starting any part of the upgrade. Upgrade Requirements To perform this upgrade, the following will be required: 1. A PC with the Xerox Utilities Tool version 03.00.0012 installed. By default, there will be an icon called 'Software Upgrade' on the desktop. A copy of the Xerox Utilities is supplied with each CopyCentre machine (in the left-hand side pocket). Updates are av

The CopyCentre will be unavailable during this time. Please make sure that the CopyCentre is free of faults and jams before starting any part of the upgrade. Upgrade Requirements To perform this upgrade, the following will be required: 1. A PC with the Xerox Utilities Tool version 03.00.0012 installed. By default, there will be an icon called 'Software Upgrade' on the desktop. A copy of the Xerox Utilities is supplied with each CopyCentre machine (in the left-hand side pocket). Updates are av