Évaluations - 2, GPA: 4 ( )

Fabricant : Country Home Products Taille : 429.64 kb Nom Fichier : Langue d'enseignement:

Reference numbers are used in the illustrations. These numbers correspond to those in the “Reference Number” (REF) column, and are followed by the description and quantity required. O/L - “Obtain Locally” in the part number column indicates common hardware that is available at your local hardware supply. All reference to right and left, forward or rearward, are from the operator steering the DR® ALLTERRAIN ™ MOWER. The manufacturer reserves the rights to change, modify, or eliminate from time to time, for technical or other reasons, certain or all data, specifications, or the product or products themselves, without any liability or obligation. DR® SNOW THROWER Safety, Operation & Maintenance Instructions PARTS 30" DR® SNOW THROWER - 8157 DR® SNOW THROWER Safety, Operation & Maintenance Instruction PARTS 30" DR® SNOW THROWER - 8157 REF DESCRIPTION QTY PART # 1 Frame 1 665939 2 Cutting edge 1 665727 3 Auger 1 665718 4 Driving shaft 1 665719 5 Protective shield 1 665742 6 Chain guard 1 665723 7 Belt cover 1 665725 8 Skid shoes 2 665677 9 Belt tensioner 1 665716 10 Bearing flange 2 665743 11 Pulley 5 3/4" dia. 1 4800002 12 Pulley 4 1/4" dia. 1 4800003 13 Pulley 4 15/16" dia. 1 4800004 14 Bearing dia. 1" 2 665494 15 Bearing dia. 3/4" 2 4300011 16 Flange 4 4300012 17 Chain #40 1 3300004 Connecting link 1 659721 18 Chain tensioner 1 665960 19 Torsion spring 1 3800016 20 Tensioner spring 1 659087 21 V belt B78 5/8" x 81" 1 4800001 22 Hex. bolt 3/8" NC x 1 3/4" lg Gr.5 2 O/L 23 Carriage bolt 5/16" NC x 5/8" Gr.5 12 O/L 24 Serrated flange bolt 5/16" NC x 1/2" Gr.5 12 O/L 25 Shear bolt incl. nut 1 660894 26 Serrated flange nut 3/8" NC, PTD 2 O/L 27 Serrated flange nut 5/16"NC 12 O/L 28 Decal "Lubrication" 1 660263 29 Cotter pin 3/16" x 2" lg 1 O/L 30 Cotter pin 1/8" x 1 3/4" lg 2 O/L 31 Decal "Danger" 1 657762 32 Decal "SNOW THROWER" 1 2500325 33 Decal "Danger" 1 660265 34 Decal "Serial number" 1 2500322 O/L = Obtain Locally DR® SNOW THROWER Safety, Operation & Maintenance Instructions PARTS Chute with deflector REF DESCRIPTION QTY PART # Chute ass'y 1 665736 1 Chute base 1 665737 2 Deflector 1 665738 3 Retaining plate 3 657333 4 Plastic ring 1 665948 5 Knob 1 657309 6 Nylon washer dia. 7/16" 3 658468 7 Carriage bolt 5/16" NC x 5/8" 3 O/L 8 Machine screw 10-32 NC x 5/8" 3 2700008 9 Nylon insert locknut 5/16" NC 2 O/L 10 Nylon insert locknut 5mm x 0.8 3 1000020 11 Decal "Warning" 1 660988 12 Decal "Danger" 1 657761 13 Hex. bolt 1/4" NC x 1/2" NC Gr.5 6 O/L 14 Serrated flange nut 1/4" NC 6 O/L 15 Flatwasher 1/4" 3 O/L O/L = Obtain Locally DR® SNOW THROWER Safety, Operation & Maintenance Instructions PARTS Manual chute rotation system REF DESCRIPTION QTY PART # 1 Rotation handle 1 665733 2 Worm shaft 1 665734 3 Plastic bushing 2 665959 4 Handle support 1 665726 5 Flat washer 41/64" 1 O/L 6 Cotter pin 1/8" x 1 3/4" 1 O/L 7 Hairpin 1/16" x 1 5/8" 1 O/L 8 U bolt 1/4" NC x 1 1/8", including nuts and plate 1 0400020 O/L = Obtain Locally DR® SNOW THROWER Safety, Operation & Maintenance Instructions PARTS Optional Drift Cutters - 8173 REF DESCRIPTION QTY PART # 1 Flange nut 5/16" NC 4 O/L 2 Drift cutters 2 665746 3 Carriage bolt 5/16" NC x 5/8" Gr.5 4 O/L O/L = Obtain Locally DR® SNOW THROWER Safety, Operation & Maintenance Instructions TORQUE SPECIFICATION TABLE GENERAL SPECIFICATION TABLE Use the following torques when special torques are not given NOTE: These values apply to fasteners as received from supplier, dry, or when lubricated with normal engine oil. They do not apply if special graphited or moly sidulphide greases or other extreme pressure lubricants are used. This applies to both UNF and UNC threads. SEE Grade No. 2 5 8 BOLT HEAD IDENTIFICATION MARKS AS PER GRADE NOTE: MANUFACTURING MARKS WILL VARY. Torque Pounds-Foot Newtons-MeterTorque Pounds-Foot Newtons-MeterTorque Pounds-Foot Newtons-Meter BOLT SIZES Inches Millimeters MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX. 1/4 6.35 5 6 6.8 8.13 9 11.0 12.2 14.9 12 15 16.3 30.3 5/16 7.94 10 12 13.6 16.3 17 20.5 23.1 27.8 24 29 32.5 39.3 3/8 9.53 20 23 27.1 31.2 35 42.0 47.5 57.0 45 54 61.0 73.2 7/16 11.11 25 30 40.7 47.4 54 64.0 73.2 86.8 70 84 94.9 113.9 1/2 12.70 45 52 61.0 70.5 80 96.0 108.5 130.2 110 132 149.2 179.0 9/16 14.29 65 75 88.1 101.6 110 132.0 149.2 179.0 160 192 217.0 260.4 5/8 15.88 95 105 128.7 142.3 150 180 203.4 244.1 220 264 298.3 358.0...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :