Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
2). Place the juice collector in the appliance (1).To place the pulp container, tilt it forwards slightly (2). Insert the top end of the pulp container first and then push home the bottom end (Fig. 3). To empty the pulp container while you are juicing, switch off the appliance and carefully remove the pulp container. Note: Reassemble the empty pulp container before you continue juicing. 4 Put the filter in the juice collector (1). Hold the lid over the filter and lower it into position (2) (Fig. 4). Make sure the filter is fitted securely onto the driving shaft (‘click’). Always check the filter before use. If you detect any cracks or damage, do not use the appliance. Contact the nearest Philips service centre or take the appliance to your dealer. 5 Snap the two clamps onto the lid to lock it into place (‘click’) (1). Align the groove in the pusher with the small protrusion on the inside of the feeding tube and slide the pusher into the feeding tube (2) (Fig. 5). Make sure the clamps are locked into position on either side of the lid. 6 7 Put the lid on the juice jug to avoid splattering. Place the juice jug under the spout (Fig. 6). Push the spout downwards before you start juicing. Note:When the spout is in upward position, it functions as a drip stop when the appliance is switched off. However, if you leave the spout in upward position during juicing, juice splashes out the spout. using the appliance The appliance only functions if all par ts are assembled properly and the lid is properly locked in place with the clamps. 1 2 Wash the fruit and/or vegetables and cut them into pieces that fit into the feeding tube. (Fig. 7) Make sure the juice jug is placed under the spout and the spout is in downward position. 8 EnglisH 3 Turn the control knob to setting 1 (low speed ) or 2 (normal speed) to switch on the appliance. (Fig. 8) -Speed 1 is especially suitable for soft fruits and vegetables such as watermelons, grapes, tomatoes, cucumbers and raspberries. -Speed 2 is suitable for all kinds of fruits and vegetables. The corresponding speed light goes on. ,4 Put the pre-cut pieces in the feeding tube and gently press them down towards the rotating filter with the pusher (Fig. 9). Do not exer t too much pressure on the pusher, as this could affect the quality of the end result. It could even cause the filter to come to a halt. Never insert your fingers or an object into the feeding tube. After you have processed all ingredients and the juice flow has stopped, switch off the appliance and wait until the filter has stopped rotating. 5 6 Push the spout upwards to prevent juice from dripping out of the spout. Slide the foam separator into the juice jug (1) and place the lid on the juice jug (2). In this way, the foam stays behind in the jug when you pour out the juice. (Fig. 10) Note: If you want your drink to have a foamy layer, do not use the foam separator. Note: If you want to store the juice in the refrigerator, make sure the lid is on the juice jug. Tips -Use fresh fruit and vegetables, as they contain more juice. Pineapples, beetroots, celer y stalks, apples, cucumbers, carrots, spinach, melons, tomatoes, pomegranates, oranges and grapes are par ticularly suitable for processing in the juicer. -You do not have to remove thin peels or skins. Only remove thick peels, e.g. those of oranges, pineapples and uncooked beetroots. Also remove the white pith of citrus fruits because it has a bitter taste. -When you prepare apple juice, remember that the thickness of the apple juice depends on the kind of apple you use.The juicier the apple, the thinner the juice. Choose a kind of apple that produces the type of juice you prefer. -Apple juice turns brown ver y quickly. To slow down this process, add a few drops of lemon juice. -Fruits that contain starch, such as bananas, papayas, avocados, figs and mangoes are not suitable for processing in the juicer. Use a food processor, blender or bar blender to process these fruits. -Leaves and leaf stalks of e.g. lettuce can also be processed in the juicer. -Drink the juice immediately after you have extracted it. If it is exposed to air for some time, the juice loses its taste and nutritional value. -To extract the maximum amount of juice, always press the pusher down slowly. -The juicer is not suitable for processing ver y hard and/or fibrous/starchy fruits or vegetables such as sugar cane. Cleaning Never use scouring pads, abrasive cleaning agents or aggressive liquids such as alcohol, petrol or acetone to clean the appliance. The appliance is easier to clean if you do so immediately after use. Switch off the appliance. Remove the plug from the wall socket and wait until the filter has stopped rotating. EnglisH 2 Remove the dirty parts from the motor unit. Dissassemble the appliance in the following order: -Remove the pulp container ; -Remove the pusher ; -Open the clamps; -Remove the lid. 3 Remove the juice collector together with the filter (Fig. 11). 4 Clean all parts excep...