Évaluations - 2, GPA: 4
(
)
)
|
Facilité d'utilisation
• Always ensure that you share and receive data with devices that are trusted and properly secured. If there are obstacles between the devices, the operating distance may be reduced. • Some devices, especially those that are not tested or approved by Bluetooth SIG, may be incompatible with your device. Turning on Bluetooth and pairing up your phone with a Bluetooth device Applications > Settings > Wireless & networks > Touch Bluetooth to turn it on. Go to Bluetooth settings > Scan for devices Choose the device you want to pair up with from the list. Once the paring is successful, your device will connect to the device. Connectivity 42 If the device you want to pair up with is not on the list, make sure that target device is set to be Discoverable, then scan again. Send data using the Bluetooth wireless feature Select a file or item, such as a contact, calendar event, memo, or media file, from an appropriate application or Downloads. Select an option for sending data via Bluetooth. NOTE: The method for selecting an option may vary by data type. Search for and pair with a Bluetooth-enabled device. Receive data using the Bluetooth wireless feature In Idle mode, open the application list and select Settings > Wireless & network > Bluetooth settings > Discoverable. Your device is dicoverable to other Bluetooth devices for 120 seconds. When prompted, enter the PIN for the Bluetooth wireless feature and select OK (if necessary). Select Accept to confirm that you are willing to receive data from the device. Received data is saved to the bluetooth folder. NOTE: If you receive a contact, you can save the contacts into the phonebook as following. : Touch Contact > Press > More > Import/Export. Refer to page 54. Wi-Fi Learn to use your device’s wireless networking capabilities to activate and connect to any wireless local area network (WLAN) compatible with the IEEE 802.11 b/g/n standards. You can connect to the internet or other network devices anywhere an access point or wireless hotspot is available. Activate the WLAN feature In Idle mode, open the application list and select Settings > Wireless & networks > Wi-Fi settings > Wi-Fi. NOTE: An active WLAN running in the background will consume battery power. To preserve battery power, activate the WLAN only when needed. Find and connect to a WLAN In Idle mode, open the application list and select Settings > Wireless & network > Wi-Fi settings. The device will automatically search for available WLANs. Select a network under Wi-Fi networks. Enter a password for the network (if necessary). Select Connect. Add a WLAN manually In Idle mode, open the application list and select Settings > Wireless & network > Wi-Fi settings > Add Wi-Fi network. Enter the SSID for the network and select the security type. Set the security settings depending on the selected security type. Select Save. Connect to a WLAN using a Wi-Fi Protected Setup (WPS) Using WPS, you can connect to a secured network. To connect to a WLAN with a WPS button, In Idle mode, open the application list and select Settings > Wireless & network Wi-Fi settings. Select Push Button Connection. Press a WPS button on the access point within 2 minutes. To connect to a WLAN with a WPS button, In Idle mode, open the application list and select Settings > Wireless & network > Wi-Fi settings. Select a network indicated by the WPS icon and select WPS PIN. On the access point, enter the PIN and press the start button. Wi-Fi Direct Learn to use the WLAN Direct feature to connect two devices via a WLAN without requiring an access point. Connect your device to another WLAN device IIn Idle mode, open the application list and select Settings > Wireless & network > Wi-Fi Direct settings > OK > Wi-Fi Direct. Press Menu > Scan. Select a device and then select Connect. When the owner of the other device accepts the connection, pairing is complete. To deactivate the WLAN Direct feature, select Disconnect Wi-Fi Direct. NOTE: Forced G/O mode(Forced Group owner mode) – Touch to activate group owner mode, which enables the legacy Wi-Fi devices to connect by scanning your phone. In this case you must enter the password that is set in the Menu > Advanced > Password. Using SmartShare SmartShare uses DLNA (Digital Living Network Alliance) technology to share digital content through a wireless network. Both devices must be DLNA certified to support this feature. To turn SmartShare on and allow sharing contents Touch Applications tab and select SmartShare. Press the Menu key and select Settings. Touch Discoverable checkbox to turn on. Touch Always accept request if you would like to automatically accept sharing requests from other devices. Touch Receive files if you would like to automatically allow the upload of files to your phone from other devices. Under the Sharing contents section, touch to checkmark the types of content you would like to share. Choose from Pictures, Videos and Music. SmartShare is now activated and ready to share contents. T...
Ce manuel est également adapté pour les modèles :Téléphones cellulaires - P940 (3.72 mb)
Téléphones cellulaires - P940 PRADA 3.0 (3.72 mb)