Évaluations - 3, GPA: 4.3
(
)
)
|
Facilité d'utilisation
End key ] Switch on/off (hold down) ] End or reject a call. Clear key Deletes a character with each press. Hold the key down to clear all input. Use this key to go back to a previous screen. Send key ] Dial a phone number and answer a call. ] In standby mode: Shows recently dialed, received and missed call list. KP260 features Left side view Side keys ] In standby mode (opened): Volume of key tone. ] During a call: increase/ decrease the volume of the earpiece. Note ] Removing the battery from the phone when the power is on may cause the phone to malfunction. MicroSD card Right side view Holes for a carrying strap Battery Charging Connector/ Cable connector and Ear jack Note ] Please ensure phone is powered on and be in idle mode before connecting the USB cable. Side camera key (Slide opened) Long press - Photo camera activation KP260 features KP260 features Rear view Battery Battery latch Push the button in, to release the battery. SIM Card Socket Battery Terminals Camera lens KP260 features Display Information On-Screen Icons Menu ntactsMenu CoContacts Icon area Text and graphic area Soft key indications Area Description First line Displays various icons. Middle Display messages, lines instructions and any information that you enter, such as number to dialled. Last line Shows the functions currently assigned to the two soft keys. The screen displays several icons. These are described below. Icon Description Tells you the strength of the network signal. Shows that you are using a roaming service. The alarm has been set and is on. Tells you the status of the battery. You have received a text message. You have received a voice message. Vibrate only menu in Profiles. Schedule External memory Flight mode WAP Connection GPRS available Calling KP260 features KP260 features Icon Description General menu in Profi les. Outdoor menu in Profi les. Silent menu in Profi les. Headset menu in Profi les. You can divert a call. You have activated Bluetooth connectivity. * The quality of the conversation may change depending on network coverage. When the signal strength is below 2 bars, you may experience muting, call drop and poor audio. Please refer to this signal as an indicator for your calls. When there are no bars, that means that there is no network coverage: in this case, you won’t be able to access the network for any service (call, messages and so on). KP260 features 18 Installation Installing the SIM card and the handset battery Make sure the power is off before you remove the battery. 1. Remove the battery. Slide down the battery cover and pull out the battery. Note ] Removing the battery from the phone when the power is on may cause the phone to malfunction. 2. Install the SIM card. Insert and slide the SIM card into the SIM card holder. Make sure that the SIM card is inserted properly and that the gold contact area on the card is facing downwards. To remove the SIM card, press down lightly and pull it in the reverse direction. To insert the SIM card To remove the SIM card Installation Installation Note ]The metal contact of the SIM card can be easily damaged by scratches. Pay special attention to the SIM card while handling. Follow the instructions supplied with the SIM card. Warning! • Do not replace or remove the SIM card while your phone is being used or turns on, or data on the SIM card might be damaged. 3. Install the battery. Insert the battery onto the back of the phone, and push the battery cover upwards until it snaps back into place. Installation Charging the Battery Before connecting the travel adapter to the phone you must first install the battery. 1. Ensure the battery is fully charged before using the phone for the first time. 2. With the arrow facing you as shown in the diagram push the plug on the travel adapter into the socket on the side of the phone until it clicks into place. 3. Connect the other end of the travel adapter to the main socket. Use only the charger included in the box. 4. The moving bars of battery icon will stop after charging is complete. Caution! • If the battery is completely discharged, the charging display will appear on the LCD approximately 1 to 1.5 minutes after connecting TA. • Do not force the connector as this may damage the phone and/or the travel adapter. • Insert the battery pack charger vertically to wall power outlet. • If you use the battery pack charger out of your own country, use an attachment plug adaptor for the proper configuration. • Do not remove your battery or the SIM card while charging. Warning! • Unplug the power cord and charger during lightning storms to avoid electric shock or fire. • Make sure that no sharp-edged items such as animal teeth or nails, come into contact with the battery. There is a risk of this causing a fire. Installation Installation Disconnecting the charger Disconnect the charger from the phone by pulling the connector, not the cord. Turning Handset ON/ OFF Turning your Handset On Ensure that your USIM card is in your hands...