|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Quick Keys- Phone Key - Contacts Key - Messaging Key - Applications Key 10 NOTE: Proximity sensorWhen receiving and making calls, the proximity sensor automatically turns the backlight off and locks the touch screen by sensing when the phone is near your ear. This extends battery life and prevents you from unintentionally activating the touch screen during calls. Warning Placing a heavy object on the phone or sitting on it can damage its LCD and touch screen functionalities. Do not cover the LCD’s proximity sensor with a protective film. This can cause the sensor to malfunction. TIPS - Tap the Menu Key whenever you open an application to check what options are available. - If your phone has errors when you use it or you cannot turn it on, remove the battery, install it again and turn it on after 5 seconds. Your Phone Side view Power/Lock Key Microphone(Main) Microphone(Sub) Charger/Accessory Port3.5mm Headset JackVolume Keys- Allows you to adjust the ringer and media volumes, or to adjust the in-call volume during a call. - Press and hold the volume down key to switch to the silent mode. TIPPress and hold the Volume Up and Volume Down Keys for one second to use the QuickMemo. Rear view microSD Card SlotCamera LensFlashSIM Card SlotBatteryExternal speaker- Allows you to listen to sounds on your phone such as ringtones and music. Back CoverFingertip cutoutInternal Antenna Your Phone Getting Started Installing the USIM card and battery Before you can start exploring your new phone, you’ll need to set it up. To insert the USIM card and battery: 1 Hold the phone on your hand firmly. With the other hand, lift the back cover using the fingertip cutout located on the bottom of the cover and remove it. Release Latch 2 Slide the USIM card into the USIM card slot. Make sure the gold contact area on the card is facing downwards. 3 Insert the battery into place by aligning the gold contacts on the phone and the battery and press the battery down until it clicks into place . 4 Align the battery cover over the battery compartment and press it down until it clicks into place . Charging your phone A rechargeable Li-ion battery is used to power your phone. A wall charger, which is included with your phone, is used to charge the battery. Ask your local LG dealer for further details regarding approved batteries and chargers. Before first time use of your phone, make sure the battery is fully charged. An uncharged battery will fully recharge after 4 hours. Charging Head USBUSB Cable NOTE Make sure the battery is installed before connecting the wall charger. If the battery is not installed and the wall charger is connected, the phone will not operate properly due to prolonged power cycling. Also, removing the battery with the wall charger connected may damage the device. Please unplug wall charger before removing battery. Warning! If the touch screen does not function while the phone’s in the process of charging, this may be due to an unstable power supply. As a result, disconnect the USB cable from the device or unplug the USB power adapter from the power outlet. 1 Connect the cables wall adapter and USB cable. 2 Plug the USB cable (as shown below) into the phone’s Charger/Accessory Port. Make sure the USB symbol on the charging cable is facing upwards. Getting Started NOTE The battery must be fully charged initially to improve battery lifetime. NOTE Your phone has an Internal Antenna. Be careful not to scratch or damage this rear area, as that will cause loss of performance. When charging your phone with a fully discharged battery, the keypad LED will briefly flash indicating charging is occurring in a mode designed to prevent battery damage. The blinking will stop and normal charging will commence once a sufficient minimum charge has been established. Inserting a microSD card Insert a microSD™ card to use the camera and other multimedia features. Multimedia contents can be saved in the microSD card. NOTE This device supports up to a 32GB microSD card. 1 Turn the phone off before inserting or removing the microSD card. Remove the back cover. Release Latch 2 Then insert the microSD card into the slot. Make sure the gold contact area is facing upwards. Removing the microSD card To safely remove the microSD card from your phone, first you need to unmount it. 1 From the Home screen, tap the Menu Key and tap System settings > Storage > Unmount SD card > OK. 2 Remove the battery cover and battery, then gently pull the microSD card from the slot. WarningDo not remove the microSD card without unmounting it first. Otherwise, it may damage the microSD card as well as your phone, and the data stored on the microSD card may be corrupted. Getting Started Formatting the microSD card WarningAll files stored on your microSD card are deleted when you format the card. 1 From the Home screen, tap the Menu Key and tap System settings > Storage. 2 Tap Erase SD card and Erase SD card button. 3 If you set an unlock pattern, enter it and tap Erase ev...
Ce manuel est également adapté pour les modèles :Téléphones cellulaires - P760 Optimus L9 (12.71 mb)
Téléphones cellulaires - Optimus L9 P760 (12.71 mb)