Évaluations - 3, GPA: 4.7
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
TALK/SENDPress to answer an incoming call or dial a number. During a call, press and hold to toggle the speakerphone on and off. • • HOMEPress to go to the Home Screen. Press and hold to display the Quick List. • • BACKPress to go to the previous screen. END/POWERPress to end a call or return to the Home screen. Press and hold to turn the phone on and off. • • Right SOFT KEYPress to perform the command above the button.Left SOFT KEYPress to perform the command above the button. TrackballKeypadNotification LEDSee “LED Alerts” in this chapter for details. EarpieceListen to a phone call. MicrophoneVibratePress and hold to toggle vibrate mode on and off. Inner CircleSee “Inner Circle” in this chapter for details. MessagingPress to open the Messaging screen. Press and this button to open SMS/ MMS messaging. • • Windows Live/CameraPress to open Windows Live. Press and this button to open the Camera. • • Getting Started 21 2.0 Megapixel CameraSee “Taking Photos and Videos with the Phone Camera” in Chapter 10. SpeakerVolume UpPress to increase the phone volume. Volume DownPress to decrease the phone volume. Sync Connector/Earphone JackConnect the supplied USB cable to synchronize information or plug in the AC adapter to recharge the battery. Connect the supplied USB stereo headset for hands-free conversation or for listening to audio media. • • Strap Holder LED alerts The notification LED indicated battery charging status and notification. Light Behavior Meaning Sold Green Battery is fully charged. Flashing Green MMS downloaded/new email/new MMS/new text message/missed phone call/new voicemail/reminder Solid Amber Charging Flashing Red Battery is low Solid Red Battery is totally discharged (shown when connected to AC) Trackball Roll the TRACKBALL to scroll left, right, up, or down. Pressing the center acts as the CENTER OK button to click items on the screen. Note You can modify TRACKBALL settings such as sensitivity, repeat mode and more. Click Start > Settings > Trackball. 1.2 Installing the SIM Card, Battery, and Storage Card SIM Card Your SIM card is given to you by your wireless service provider and contains your basic subscriber information, such as your phone number and your address book. You need to remove the back cover before you can install the SIM card, battery and storage card on your device. Also, make sure to always turn off the power before installing or replacing the SIM card and battery. To remove the back cover Make sure your device is turned off. Hold the device securely with the front facing down. With your thumb or finger, lift up the bottom of the back cover. To replace the back cover Secure the top part of the back cover first by aligning the two tabs on the back cover into the two openings located on the topmost part of the back of the device. Press the bottom part of the back cover down to lock the cover into place. You will hear a click when the back cover is locked in place. To install the SIM card Locate the SIM card slot and unlock the SIM card lock by pressing it towards the battery compartment. Insert the SIM card with its gold contacts facing down and the cut-off corner facing away from the slot (check the SIM card slot for the correct orientation when inserting the SIM card). Slide the SIM card completely into the slot. Press the SIM card lock closed to lock the SIM card in place. Cut cornerSIM card lock To remove the SIM card Remove the battery if it is installed. Unlock the SIM card lock. Slide the SIM card out to remove it. Storage Card To have additional storage for your images, videos, music, and files, you can purchase a microSD™ card and install it into your device. To install the microSD card Remove the back cover. Insert the microSD card into the slot with its gold contacts facing down until it clicks into place. Refer to the illustration above the SIM card slot for the correct orientation. Note To remove the microSD card, press it to eject it from the slot. Battery Your phone comes with a rechargeable Lithium-ion battery and is designed to use only manufacturer-specified original batteries and accessories. To install the battery Remove the back cover. Align the exposed metal contacts on the edge of the battery with the prongs in the body of the phone. Insert the contacts side of the battery first and then gently push the battery into place. Replace the back cover. To remove the battery Make sure your phone is turned off. Remove the back cover. There is a recessed area in the chassis near the bottom of the battery. From this recessed area, use your finger to pull the battery out and remove the battery. Recessed area 1.3 Charging the Battery New batteries are shipped partially charged. Before you start using your phone, it is recommended that you install and charge the battery. Some batteries perform best after several full charge/discharge cycles. To charge the battery Connect the USB connector of the AC adapter to the sync connector on the top right side of your phone. Pl...