Log:
Évaluations - 0, GPA: 0 ( )

Instructions Nokia, Modèle X2-01

Fabricant : Nokia
Taille : 1.89 mb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Par ce dispositif a également d'autres instructions :

Facilité d'utilisation


Not following them may be dangerous or illegal. Readthe complete user guide for further information. SWITCH OFF IN RESTRICTED AREAS Switch the device off when cell phone use is not allowed or when it may causeinterference or danger, for example, in aircraft, in hospitals or near medicalequipment, fuel, chemicals, or blasting areas. Obey all instructions inrestricted areas. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle whiledriving. Your first consideration while driving should be road safety. INTERFERENCE All wireless devices may be susceptible to interference, which could affectperformance. QUALIFIED SERVICE Only qualified personnel may install or repair this product. KEEP YOUR DEVICE DRY Your device is not water-resistant. Keep it dry. PROTECT YOUR HEARING Listen to a headset at a moderate level, and do not hold the device near yourear when the loudspeaker is in use. Your Nokia X2-01 in brief Your Nokia X2-01 in brief Key features • Enjoy the messaging features with the full QWERTY keyboard. • Manage your social networking profiles and music with dedicated keys. • Read and reply to your mail when out and about. • See an overview of your correspondence with someone in the conversationalmessaging view. Keys and parts 1 Earpiece 2 Selection keys 3 Call key4 Navi™ key (scroll key) 5 End/Power key 6 Backspace key7 Enter key Your Nokia X2-01 in brief Your Nokia X2-01 in brief 10 Music key 11 Function key12 Shift key13 Sym key14 Messaging key 15 Ctrl key 16 Headset connector/Nokia AV connector (3.5 mm) 17 Charger connector 18 Camera lens 19 Wrist strap hole 20 Loudspeaker Get started Get started To access some messaging or music features, press the messaging or music key. Youcan assign different functions to the keys. Get started Insert the SIM card and battery Note: Switch the device off and disconnect the charger and any other devicebefore removing any covers. Avoid touching electronic components while changing anycovers. Always store and use the device with any covers attached. The SIM card and its contacts can be easily damaged by scratches or bending, so becareful when handling, inserting, or removing the card. Important: Do not use a mini-UICC SIM card, also known as a micro-SIM card, amicro-SIM card with an adapter, or a SIM card that has a mini-UICC cutout (see figure) in this device. A micro-SIM card is smaller than the standard SIM card. This device does not support the use of micro-SIM cards and use of incompatible SIM cards may damagethe card or the device, and may corrupt data stored on the card. Get started Get started 1 Place your finger in the recess at the bottom of the device, and carefully lift andopen the back cover (1). 2 Insert the SIM card. Make sure the contact area of the card is facing down (2). 3 Line up the contacts of the battery and the battery compartment, and insert thebattery (3). 4 To replace the back cover, direct the top locking catches toward their slots (4), andpress down until the cover locks into place (5). Remove the SIM card Get started Get started Switch on or off Press and hold the power key. Antennas Avoid touching the antenna area while the antenna is in use. Contact with antennasaffects the communication quality and may reduce battery life due to higher power levelduring operation. Charge the battery Your battery has been partially charged at the factory, but you may need to recharge itbefore you can switch on your phone for the first time. If the phone indicates a lowcharge, do the following: 1 Connect the charger to a wall outlet. 2 Connect the charger to the phone. 10 Get started 10 Get started then from the wall outlet. You do not need to charge the battery for a specific length of time, and you can use thephone while it is charging. If the battery is completely discharged, it may take several minutes before the chargingindicator is displayed or before any calls can be made. If the battery has not been used for a long time, to begin charging, you may need toconnect the charger, then disconnect and reconnect it. Connect a headset Do not connect products that create an output signal, as this may damage the device. Do not connect any voltage source to the Nokia AV connector. If you connect an externaldevice or headset, other than those approved by Nokia for use with this device, to theNokia AV connector, pay special attention to volume levels. Insert a memory card Use only compatible memory cards approved by Nokia for use with this device. Incompatible cards may damage the card and the device and corrupt data stored on thecard. Your phone supports microSD cards with a capacity of up to 8 GB. A compatible memory card may be supplied with the device, and may already beinserted in the device. If not, do the following: Get started 11 Get started 11 1 Open the cover of the memory card slot. 2 Insert the card into the memory card slot with the contact surface facing up, andpress until it locks into place. 3 Close the cove...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories