Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
To capture two or more images in defined intervals, select the desired time interval. To capture the images, press the capture key. To stop capturing images, selectCancel. The number of images taken depends on theavailable memory. The captured images are shown in a grid on the display. To view an image, press the scroll key. If you used atime interval, only the last captured image is shown onthe display. You can view the other images in thePhotos application. You can also use the sequence mode with the self- timer. To return to the sequence mode viewfinder, press thecapture key. To switch off the sequence mode, in the active toolbar, select Sequence mode > Single shot. You in the picture— The self- timer is available only in the main camera. Usethe self- timer to delay the capture so that you caninclude yourself in the picture. Camera To set the self-timer delay, in the active toolbar, selectSelf timer > 2 seconds, 10 seconds, or 20 seconds. To activate the self-timer, select Activate. The device beeps when the timer is running and the quadrangleblinks just before the image capture. The camera takesthe picture after the selected delay elapses. To switch off the self-timer, in the active toolbar, selectSelf timer > Off. Tip: In the active toolbar, select Self timer > 2 seconds to keep your hand steady when takinga picture. Tips on taking good photographs Picture quality Use the appropriate picture quality. The camera hasseveral picture quality modes. Use the highest settingto make sure that the camera produces the best picturequality available. Note however, that better picturequality requires more storage space. For multimediamessage (MMS) and e-mail attachments it may benecessary to use the smallest picture quality modeoptimised for MMS sending. You can define the qualityin the camera settings. See "Still image camera settings" , p. 69. Background Use a simple background. For portraits and otherpictures with people, avoid having your in front of a cluttered, complex background that may distractattention from the subject. Move the camera, or thesubject, when these conditions cannot be met. Movethe camera closer to the object to take clearer portraits. Depth When shooting landscapes and sceneries, add depth toyour pictures by placing objects in the foreground. Ifthe foreground object is too close to the camera, it maybe blurred. Lighting conditions Changing the source, amount, and direction of lightcan change photographs dramatically. Here are sometypical lighting conditions: . Light source behind the subject. Avoid placing yoursubject in front of a strong light source. If the lightsource is behind the subject or visible in the display, the resulting picture may have weak contrast, maybe too dark, and may contain unwanted lighteffects. . Sidelit subject. Strong side light gives a dramaticeffect but may be too harsh, resulting in too muchcontrast. . Light source in front of the subject. Harsh sunlightmay cause the subjects to squint their eyes. Thecontrast may also high. . Optimal lighting is found in situations where thereis plenty of diffused, soft light available, for Camera example, on a bright, partially cloudy day or on asunny day in the shadow of trees. Video recordingVideo capture indicators The video viewfinder displays the following: 1 — Capture mode indicator 2 — Video stabilisation on indicator See "Video settings" , p. 71. 3 — Audio mute on indicator 4 — Active toolbar (not displayed during recording) . See "Active toolbar" , p. 63. 5 — Battery charge level indicator 6 — Video quality indicator. To change this setting, select Options > Settings > Video quality. 7 — Video clip file type 8 — Available recording time. When you are recording, the current video length indicator also shows theelapsed and remaining time. 9 — The location to which the video clip is saved. 10 — GPS signal indicator. See "Location information" , p. 64. To display all viewfinder indicators, select Options > Show icons. Select Hide icons to display only thevideo status indicators, and during the recording, thetime remaining, zoom bar when zooming, and theselection keys. Record videos 1. If the camera is in the image mode, select the videomode from the active toolbar. 2. To start recording, press the capture key. The redrecord icon ( ) is displayed and a tone sounds. 3. To pause recording at any time, press Pause. Select Continue to resume. If you pause recording press any key within one minute, the recordingstops. To zoom in or out of the subject, use the zoom keyin your device. 4. To stop recording, press the capture key. The videoclip is automatically saved in Photos. The maximumlength of a video clip is approximately 30 seconds with sharing quality and 90 minutes with other . To add the video clip to an album, select Add to quality settings. album Camera To activate the front camera, select Options > Use secondary camera. To start recording a video, pressthe scroll key. To zoom in or out, scroll up or down. After recordin...