Log:
Évaluations - 0, GPA: 0 ( )

Instructions Philips, Modèle CT6398/00MPEURO

Fabricant : Philips
Taille : 847.91 kb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


Setting the backlight for a shorter period of time as well as avoiding unnecessary navigating in the menus will also help to save the battery’s energy for longer phoning and stand- by performances. Information displayed on the battery • Your phone is powered by a rechargeable battery. • Use specified charger only. • Do not incinerate. • Do not deform or open the battery. • Do not allow metal objects ( such as keys in your pocket) to short circuit the battery contacts. • Avoid exposure to excessive heat ( > 60° C or 140°F) , moisture or caustic environments. You should only use Philips Authentic Accessories, as the use of any other accessories may damage your phone and will make all guarantees for your Philips phone null and void. Make sure damaged parts are replaced immediately by a qualified technician and that they are replaced with genuine Philips replacement parts. Precautions Do not use your phone while driving Environmental care Do not use your phone while driving Environmental care It lowers concentration, which can be dangerous. Adhere to the following guidelines: Give your full attention to driving. Pull off the road and park before using the phone. Respect the local regulations in countries where you drive and use your GSM phone. If you want to use your phone in a vehicle, install the hands-free car kit which is designed for that purpose, still ensuring you give full attention to driving. Ensure that your phone and car kit do not block any air bags or other security devices fitted in your car. The use of an alarm system to operate a vehicle's light or horn to indicate incoming phone calls is prohibited on public roads in some countries. Check local regulations. EN 60950 Norm In case of hot weather or after a prolonged exposure to the sun (e.g. , behind a window or a windscreen), the temperature of your phone's casing might increase, especially when featuring a metallic finish. Be very careful in this case when picking up your phone and also avoid using it with an ambient temperature over Remember to observe the local regulations regarding the disposal of your packaging materials, exhausted batteries and old phone and please promote their recycling. Philips has marked the battery and packaging with standard symbols designed to promote the recycling and appropriate disposal of your eventual waste. Battery: The crossed- out dustbin signifies that the battery should not be disposed of with general household waste. Packaging: The mobius loop symbol signifies the labelled packaging material is recyclable. The green point symbol signifies that a financial contribution has been made to the associated national packaging recovery and recycling system ( e. g. EcoEmballage in France) . The chasing arrows symbol on the plastic tray and plastic bag indicate that the materials are recyclable and also identifies the plastic material. Precautions Troubleshooting Troubleshooting The display shows BLOCKED when you switch on The and symbols are not displayed Remove and reinstall the battery ( see page 1). Then charge the phone until the battery icon has stopped flashing. Finally, unplug from the charger and try to switch the mobile on. Somebody tried to use your phone but didn’t know the PIN code nor the unblocking code (PUK) . Contact your service provider. The network connection is lost. Either you are in a radio shadow ( in a tunnel or between tall buildings) or you are outside the network coverage area. Try from another place or contact your network operator for assistance/information about the network. The display doesn't respond ( or the display responds slowly) to key presses Your phone doesn’t return to the idle screen Your phone doesn’t display the phone numbers of incoming calls The display responds more slowly at very low temperatures. This is normal and does not affect the operation of the phone. Take the phone to a warmer place and try again. In other cases please contact your phone supplier. Press and hold c, or switch off the phone, check that the SIM card and the battery are installed correctly, and switch it on again. This feature is network and subscription dependent. If the network doesn’t send the caller’s number, the phone will display Call 1 instead. Contact your operator for detailed information on this subject. Troubleshooting You can’t send text You can’t send text The display shows Check that the SIM card has messages message exchanges with other SIM failure been inserted in the right networks. Contact your position ( see page 1) . If the operator for detailed problem remains, your SIM information on this subject. card may be damaged. The display shows IMSI failure This problem is related to your subscription. Contact You are not sure Contact your operator. To receive all calls, make sure You can’t receive and/ or store JPEG pictures your operator. A picture may not be accepted by your mobile phone if it is too large, or if it that you are receiving calls properly that none of the features «...

Ce manuel est également adapté pour les modèles :
Téléphones cellulaires - CT6398/00FGEURO (847.91 kb)
Téléphones cellulaires - CT6398/00AREURO (847.91 kb)
Téléphones cellulaires - CT6398/000000EU (847.91 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories