Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Using any other power cable or power supply may cause damage to the device and void your warranty. 4 CAUTION: yThe apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. yMinimum distance around the apparatus for sufficient ventilation, no less than 5 cm. yThe ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloth, curtains etc. yNo naked flame sources, such as lighted candles, should be placed on the apparatus. yInternal lithium battery in the unit should not be replaced by user because of danger of explosion if battery is incorrectly replaced ,and must be replaced with the same type battery by expert. Device operating temperature When operating in cold weather, the device shall not print. Bring it inside from the cold and give about 10 min to adjust to the specified operating temperature (5 °C - 40 °C). Then try printing again. (For the appropriate use, it is recommended not to operate it outdoors in winter.) ,Note CAUTION when using this product in environments of low humidity yIt may cause static electricity in environments of low humidity. yIt is recommended to use this product after touching any metal object which conducts electricity. >Caution CAUTION: yThe apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. yMinimum distance around the apparatus for sufficient ventilation, no less than 5 cm. yThe ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloth, curtains etc. yNo naked flame sources, such as lighted candles, should be placed on the apparatus. yInternal lithium battery in the unit should not be replaced by user because of danger of explosion if battery is incorrectly replaced ,and must be replaced with the same type battery by expert. Device operating temperature When operating in cold weather, the device shall not print. Bring it inside from the cold and give about 10 min to adjust to the specified operating temperature (5 °C - 40 °C). Then try printing again. (For the appropriate use, it is recommended not to operate it outdoors in winter.) ,Note CAUTION when using this product in environments of low humidity yIt may cause static electricity in environments of low humidity. yIt is recommended to use this product after touching any metal object which conducts electricity. >Caution Contents Safety information 2 STEP 1 Getting Started 6 Supplied items ............................ 6 Product Overview ......................... 6 Power On / Off ............................ 7 STEP 2 Charging Battery 7 STEP 3 Inserting Photo Paper 9 Cleaning printer head using Smart Sheet .. 9 Paper Jam Solution ......................10 STEP 4 Installing App 10 Installing App for Android phone ........10 App Setting .............................11 Installing App for iPhone ................12 Setting Bluetooth of iPhone .............12 STEP 5 Printing Photo 13 Printing using Android phone ...........13 Printing using iPhone ....................16 Notes on the printing 18 Checking Label 19 About LED Indicator 20 Specifications 21 Troubleshooting 22 Product Overview STEP 1 Getting Started Reset hole Supplied items Micro USB port (for recharging) Paper exit slot LG Pocket Photo Printer USB cable Charger Button (Power) Paper insert door Paper insert slot ZINK Photo Paper Owner’s manual 7 Power On / Off On : Press and hold for 4 sec. Off : Press and hold for 2 sec. yWhen turning the device on, the button flashes for 5 sec. Then printing is available. yThe LED indicator ( button) shows the device condition. For more information, see “About LED indicator” on page 20. ,Note STEP 2 Charging Battery This device uses built-in battery. Before using it, charge the battery in full. (Refer to below) Battery charging time : 1.5 hours Checking the charging status with button yCharging : / 100 % : (When power-off ) y10 % : flashes for about 3 sec. y0 % : flashes for about 30 sec. and turns off. yLG Pocket Photo is always charged when connected to the power supply except for being printed. Power On / Off On : Press and hold for 4 sec. Off : Press and hold for 2 sec. yWhen turning the device on, the button flashes for 5 sec. Then printing is available. yThe LED indicator ( button) shows the device condition. For more information, see “About LED indicator” on page 20. ,Note STEP 2 Charging Battery This device uses built-in battery. Before using it, charge the battery in full. (Refer to below) Battery charging time : 1.5 hours Checking the charging status with button yCharging : / 100 % : (When power-off ) y10 % : flashes for about 3 sec. y0 % : flashes for about 30 sec. and turns off. yLG Pocket Photo is always charged when connected to the power supply except for being printed. 8 Charger (AC Adapter) yModel : MCS-01CT yManufactur...
Ce manuel est également adapté pour les modèles :Téléphones cellulaires - PD233 (1.9 mb)
Imprimantes - PD233 Pocket Photo (1.9 mb)