Évaluations - 3, GPA: 4.7 ( )

Fabricant : Humax Taille : 395.57 kb Nom Fichier : UM_S-ZAPPER_100GB_081108_low.pdf Langue d'enseignement:

• Package contents may vary according to area. • The front and rear of the product are subject to change without notice. . . . ". . 1. STANDBY LED Red light is emitted when the product is in standby mode. 2. STANDBY BUTTON Switches between operation and standby modes. 3. VOL BUTTON Display the volume bar. 4. CH-/CH+ or VOL-/VOL+ BUTTON Moves the TV/Radio channel or volume up/down. 5. TV LED Green light is emitted when the product is in TV mode. 6. RADIO LED Amber light is emitted when the product is in radio mode. 7. SMARTCARD SLOT A slot for a Smartcard Note: The front of the product is subject to change without notice. . . 1. STANDBY LED Red light is emitted when the product is in standby mode. 2. STANDBY BUTTON Switches between operation and standby modes. 3. VOL BUTTON Display the volume bar. 4. CH-/CH+ or VOL-/VOL+ BUTTON Moves the TV/Radio channel or volume up/down. 5. TV LED Green light is emitted when the product is in TV mode. 6. RADIO LED Amber light is emitted when the product is in radio mode. 7. SMARTCARD SLOT A slot for a Smartcard Note: The front of the product is subject to change without notice. . . 1. STANDBY LED Red light is emitted when the product is in standby mode. 2. TV LED Green light is emitted when the product is in TV mode. 3. RADIO LED Amber light is emitted when the product is in radio mode. 4. STANDBY BUTTON Switches between operation and standby modes. 5. VOL BUTTON Display the volume bar. 6. CH-/CH+ or VOL-/VOL+ BUTTON Moves the TV/Radio channel or volume up/down. 7. SMARTCARD SLOT Slots for Smartcards Note: The front of the product is subject to change without notice. . . 1. STANDBY LED Red light is emitted when the product is in standby mode. 2. STANDBY BUTTON Switches between operation and standby modes. 3. VOL BUTTON Display the volume bar. 4. CH-/CH+ or VOL-/VOL+ BUTTON Moves the TV/Radio channel or volume up/down. 5. TV LED Green light is emitted when the product is in TV mode. 6. RADIO LED Amber light is emitted when the product is in radio mode. 7. SMARTCARD SLOT A slot for a Smartcard Note: The front of the product is subject to change without notice. . . . ' . . 1. LNB IN Connects a satellite antenna cable. 2. LNB OUT Connects another digital satellite receiver. 3. RS-232C Connects to the PC to update software. 4. AUDIO L/R Connects to the TV or VCR using an RCA cable. 5. VIDEO Connects to the TV or VCR using an RCA cable. 6. RFIN Connects to the general aerial antenna or cable. 7. RF OUT Connects to the RF IN of the TV using an RF cable. 8. POWER CORD Connects to the power cord. Note: The rear panel of the product is subject to change without notice. . . . '(. . 1. SOURCE Currently not supported 2. TV/RADIO Switches between TV and radio modes. 3. NUMERIC(0-9) BUTTONS Enters a TV/radio channel number. 4. MENU Displays the main menu. 5. TIME-WHITE Displays the reservation box while watching a programme. Displays the time box in the guide. 6. ARROW BUTTONS Changes the channel or moves the cursor up, down, left or right. 7. i (INFORMATION)-RED Displays the channel and programme information. 8. SOUNDTRACK-GREEN Displays the soundtrack list. 9. CH-/CH+ or PAGE-/PAGE+ Changes the channel or page. 10.RECALL Returns to the previous channel. 11.FREEZE Freezes the TV screen you are watching. Does not cease audio. 12.WIDE Sets the display format. 13.HEPG Switches between Humax EPG and Standard EPG.(Not available in IR-ACE II UBI) . . Note:Thefrontoftheproductissubjecttochangewithoutnotice. 14.STANDBY Switches between operation and standby modes. 15.GUIDE Displays the standard EPG. 16.EXIT Closes and returns to the previous menu. 17.OK Selects a menu or confirms the selected operation. Displays the channel list while watching a programme. 18.ZOOM-BLUE Enlarges the picture. 19.SUBTITLE-YELLOW Displays the subtitle language list. 20.V-/ V+ Adjusts the audio volume. 21.MUTE Mutes or unmutes the audio temporarily. 22.? Currently not supported 23.UHF Displays the UHF menu. 24.SLEEP Sets the sleep time. 25.FAV Displays the favourite list. . . )) You can connect the product to the TV with the particular equipments for gaining optimum signal quality. The product provides various interfaces to connect to the TV, VCR or other devices. Select the most appropriate procedure depending on the equipment you have. 1. Connect the antenna to the LNB IN. 2. Connect the product and the TV using an RCA cable. 3. Connect the product and the TV using an RF cable. 4. Connect the power cord of the product to a wall outlet. 5. Power on by pressing the STANDBY button of the remote control or the STANDBY button at the front of the product. Note: • Connect your aerial or cable to the RF IN to watch analogue channels. • Tune the TV to an UHF channel if the product is connected to the TV using an RF cable. . . * ## + * ## + When powering on your product for the first time after purchase, the installation wizard will operate automatically. . , . Select the approp...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :