Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
Before attempting to use your antenna, please remove all parts from the box and read the installation and use instructions carefully. Included with the antenna are: Band Separator Matching Transformer 120 VAC, 60 Hz to 12 VDC, 200mA Wall Adapter Five Year Limited Warranty ANT200 ANT200 Manual 7/31/95 6/10/99 11:46 AM Page 2 Important Safeguards • Read and follow the instructions before operating. • Retain the instructions for future use. • Follow all warnings on the adapter and instructions. Water and Moisture Do not use this antenna near water. Keep away from a bathtub, sink, wet basement or swimming pool and other wet places. Power Source The wall adapter for this antenna should be operated only from a standard 120 V, 60 Hz wall outlet. If you are not sure of the type of power supply to your home, contact your local power company. Ventilation Slots and openings in the cabinets are provided for ventilation and to ensure reliable operation and prevent overheating. Do not use on a bed, sofa, rug, or similar surface. Servicing Do not attempt to service this antenna yourself as opening or removing covers may expose you to dangerous voltage or other hazards and voids your warranty. Refer servicing to qualified service personnel. Cleaning Unplug the antenna from the wall outlet before cleaning. Use a lint free cloth for cleaning the outside of the unit only. Do not use aerosol cleaners. Important Information Your antenna’s AC adapter operates on 120 volts AC, 60 Hz. CAUTION: • To reduce the risk of electric shock, do not remove the cover or back of the AC adapter or antenna. There are no user serviceable parts inside. • If you spill liquid on the AC adapter or antenna, disconnect the AC adapter’s power cord from the AC outlet to prevent possible fire or shock hazard and consult authorized service personnel. • To prevent damage to internal parts, do not expose the antenna to moisture. • Maintain electrical safety. Powerline-operated equipment or accessories connected to this unit should bear the UL listing mark or CSA certification mark on the accessories themselves and should not have been modified so as to defeat the safety features. This will help avoid any potential hazard from electrical shock or fire. 2 If in doubt, contact qualified service personnel. ANT200 Manual 7/31/95 6/10/99 11:46 AM Page 3 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important Safety Instructions For Antenna Before using the AC adapter or antenna, read all instructions and cautionary markings on the AC adapter and antenna. Do not expose the AC adapter and antenna to moisture of any kind. Use of any AC adapter not included with the antenna or recommended or sold by the antenna manufacturer may result in a risk of fire, electric shock, or injury and will void your warranty. To reduce risk of damage to the AC adapter, do not pull on the cord to disconnect from the wall outlet. Instead, disconnect the unit from the outlet by pulling on the plug rather than the cord. Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress. Do not operate AC adapter or antenna with a damaged cord or plug. Replace it immediately. Do not operate the AC adapter or antenna if it has received a sharp blow, been dropped, or otherwise damaged in any way. Do not disassemble the AC adapter or antenna. Incorrect reassembly may result in a risk of electric shock. Disassembly of product by unauthorized personnel will result in voiding your product warranty. To reduce the risk of electric shock, unplug AC adapter from outlet before attempting any maintenance or cleaning. Do not install the antenna near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration, or shock. Do not use alcohol, benzine, or thinner to clean antenna’s surfaces. Be sure to save instructions for future reference. 3 ANT200 Manual 7/31/95 6/10/99 11:46 AM Page 4 Installation Hooking Up To The Antenna Input On Your TV Or VCR Your antenna may be hooked up directly to your TV or VCR 1. Locate the “Antenna In” connector on the back of your TV or VCR. 2. Screw the end of the antenna cable to the “Antenna In” connector on the back of your TV or VCR. ANTENNA 300 OHM Hook Up If you own a TV that will not allow direct hook-up to the “Antenna In” connector, see the diagrams below for hooking up with the band separator and matching transformer. Band Separator UHF VHF Band UHF VHF Separator 75/300 ohm Matching Transformer 4 Screw the Antenna cable into the band separator (included). Screw the VHF antenna cable into the VHF terminal and attach the UHF antenna lead to the UHF screws on the TV. Screw the Antenna cable into the band separator (included). Connect the VHF cable from the band separator to the 75/300 ohm transforme...