Évaluations - 5, GPA: 3.4 ( )

Fabricant : Sagem Taille : 3.14 mb Nom Fichier : Langue d'enseignement:

3-3 CONNECTION TO TV SET, VCR AND AN 3-2 INSTALL TOP UP TV CARD (only ITD 68/72) rd To access, Top Up TV channels, you may turn the receiver and s indicated below. 3-4 AUDIO AMPLIFIER (only ITD 64) Yellow DIGITAL Red Analog R White Analog L You can connect your Set Top Box to your Hi-Fi amplifier (standard or home cinema) by using a standard jack 3.5 to 3 RCA cable(*) to obtain excellent listening comfort comparable to those of audio programs. Volume adjustment is possible directly from your Set Top Box only on analog output. (*) This kind of cable is also intended for digital and analog camcorder. - 4 4. FIRST TIME INSTALLATION 4-1 GENERAL INFORMATION Once you have correctly connected the Set Top Box, you also have to perform a “First time installation”. During this procedure, helpful information is displayed at the bottom of the menus. Please note! The button always confirms a selection within these menus, and pressing it will take you to the next step in the installation process. However, and this is important, often more than one value has to be entered in a menu. First, perform all necessary settings on the different lines. Then, confirm them all simultaneously by pressing . • Use cursors and to move upwards and downwards from one line to another. • Use cursors and to change settings. You can also use the numerical keys on the remote control to enter numeric values. 4-2 FIRST TIME INSTALLATION • Plug in your Set Top Box. • The “First time installation” menu is shown. • Press to continue. 4-3 LANGUAGE • Select the desired language with cursors and . • Press to continue. - 5 4. FIRST TIME INSTALLATION 4-4 COUNTRY • Select the desired country with cursors and . This will also set the current time. • Press to continue. 4-5 CHANNEL SEARCH IN PROGRESS This menu will be shown as the Set Top Box is searching for TV and radio channels. Please note that the search procedure may take a few minutes. You can cancel the search at any time by pressing EXIT. When the search procedure has ended, a message will indicate how many TV and radio channels have been found. • Press to finish the first time installation and to open the door of Digital TV. 4-6 AERIAL FAILURE If the channel search has found no channel, this screen is displayed to help you adjust the aerial. Enter a channel number (refer to http//For example, Oxford channel numbers are 29, 34, 48,51, 52, 68. These numbers depend on broadcasters and are subject to change.) and move the antenna until the signal and quality bars are green. When signal and quality are green, press BACK to launch a new channel search. - 6 5. BOX ADVANCED SETTINGS Go to MENU/INSTALLATION/BOX SETTING/CHANNEL SEARCH. 5-1 PRELIMINARY/ INSTALLATION CODE Your Set Top Box is supplied ready to use for a standard configuration. TV : 4/3 format, RGB (Letterbox) VCR : PAL (none on ITD 58/59/60/68) Access to the installation screens shown below will enable you to adapt your Set Top Box to your favourite equipment. The access to main menu is obtained by pressing the MENU key. You can memorise your selections by pressing the key. Return to the previous screen by pressing the BACK key. Exit from all the screens by pressing the EXIT key. Use cursor to move down to the INSTALLATION line and press to confirm. Access to the installation menus is protected by a secret installation code to avoid any unintentional misadjustment. Your Set Top Box is supplied with default code 1234. Note: you will not be prompted to enter any code, if the installation code is «0000». Enter your code. As soon as each value is entered, the segment is replaced by a star. Using cursor of the remote control unit, you can come back to a value that has already been entered and modify it provided the code has not been confirmed by . After entering the four digits press to confirm. An error message will be displayed if the code you have entered is not correct. INSTALLATION ENTER YOUR INSTALLATION CODE THEN PRESS OK TO CONFIRM - - - MAIN MENU ENTER YOUR INSTALLATION CODE THEN PRESS OK TO CONFIRM BAD CODE PLEASE TRY AGAIN **** - 7 5. BOX ADVANCED SETTINGS 5-2 CHANNEL SEARCH: AUTO TUNE This installation will complete list "All services" with all the channels found during the scanning of all the frequencies. This list is a summary of all the channels and will not be modified. It will be possible to create personal lists based on this reference list, also called list "All services" (see page 12). It would be advisable to launch a channel search monthly in order to keep your Set Top Box up todate. Press to start channel tuning. An indicator at the bottom of the screen will indicate the percentage of the scanned frequency band. The number of different services found is displayed in real time. A message at the end of the scanning process will ask you to memorize. Press . You can cancel the scanning process at any time by pressing the EXIT key. You can memorize or not. Note: You may observe a d...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :