Évaluations - 4, GPA: 3.5
(
)
)
|
Par ce dispositif a également d'autres instructions :
Haut-parleurs - SA-VE315 (81.62 kb)
Haut-parleurs - SA-VE315 (97.6 kb)
Haut-parleurs - SA-VE315 (685.7 kb)
Facilité d'utilisation
*SA-VE315 only Location of each speaker Center* Front Front (Left) (Right) A A (Left) BB (Right) Setting the center speaker (SA-VE315 only) Set the center speaker firmly on top of the TV set, making sure it is completely level. Foot pads Foot pads Subwoofer Rear*Rear* *SA-VE315 only Each speaker should face the listening position. Better surround effect will result if all speakers are set at the same distance from the listening position. Place the front speakers at a suitable distance to the left and right of the television. Place the subwoofer on either side of the television. Place the center speaker on the top-center of the TV set. The placement of rear speakers greatly depends on the configuration of the room. The rear speakers may be placed on both sides of the listening position Aor behind the listening position B. Tips • Movies are best enjoyed in a room that produces no echoes (as in one with surrounding curtains). • Music (especially classical music) is best enjoyed in a room that produces some echo. Setting other speakers For greater flexibility in the positioning of the speakers, use the optional WS-FV10, WSTV10, or WS-WV10 speaker stand (available only in certain countries). WS-FV10 WS-TV10 WS-WV10 (for rear speakers) Tip The height of the front speakers should be adjusted to about the center of the TV screen. 7GB Listening to the sound POWER POWER indicator LEVEL MODE MIN MAX MOVIE MUSICPOWER First, turn down the volume on the amplifier. The volume should be set to minimum before you begin playing the program source. 1 Turn on the amplifier and select the program source. 2 Press POWER on the subwoofer. The POWER indicator on the subwoofer lights up green. 3 Play the program source. Adjusting the sound Slight adjustments to the system can enhance your sound enjoyment. Adjusting the subwoofer POWER LEVEL MODE MIN MAX MOVIE MUSIC LEVEL MODE 1 Set MODE according to the program source as follows: Source MODE DVD, LD, video cassette MOVIE or other video source MD, CD, cassette tape MUSIC or other audio source 2 Rotate LEVEL to adjust the volume. Set the volume level to best suit your preference according to the program source. Notes • Some amplifier functions for enhancing the sound may cause distortion in the subwoofer. If such distortion occurs, turn off those functions. • To enjoy high-quality sound, do not turn the subwoofer volume too high. • To increase the bass sound from the subwoofer, connect the system using “Hookup B” (see page 5). • The bass sound is enhanced in MOVIE mode rather than in MUSIC mode. Therefore, if you change the mode to MOVIE while listening to some sources that do not include the bass sound, you may not be able to get the effect. 8GB Setting your amplifier to enjoy movies (SA-VE315 only) For the Dolby Digital (AC-3) If your amplifier is connected internally or externally with a Dolby Digital (AC-3) processor, you should use the setup menus for the amplifier to specify the parameters of your speaker system. See the table below for the proper settings. For details on the setting procedure, refer to the manual that was provided with your amplifier. When “Hookup A” is used (Speaker setup) For Set to Front speakers SMALL Center speaker SMALL Rear speakers SMALL Subwoofer ON (or YES) (Other setup) Menu Set to LFE MIX* –10 dB BASS BOOST** ON * Low Frequency Effect **A function that reinforces the bass sound When “Hookup B” is used (Speaker setup) For Set to Front speakers LARGE Center speaker SMALL Rear speakers SMALL Subwoofer OFF (or NO) (Other setup) Menu Set to LFE MIX –10 dB BASS BOOST ON For the Dolby Pro Logic If your amplifier is connected internally or externally with a Dolby Pro Logic processor, you should set the surround effect mode to “NORMAL” on the amplifier for your particular speaker system. For details on the setting procedure, refer to the manual that was provided with your amplifier. 9GB Precautions On safety • Before operating the system, be sure that the operating voltage of the system is identical with that of your local power supply. • The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. • Unplug the system from the wall outlet if it is not to be used for an extended period of time. To disconnect the cord, pull the cord by grasping the plug. Never pull the cord itself. • Should any liquid or solid object fall into the system, unplug the system’s power cord and have the system checked by qualified personnel before operating it any further. • AC power cord must be changed only at the qualified service shop. On operation • Do not drive the speaker system with a continuous wattage exceeding the maximum input power of the system. • If the polarity of the speaker connections are not correct, the bass tones will be weak and the position of the various instruments obscure. • Contact between bare speaker wires at the speaker terminals may result in a short-circuit....
Ce manuel est également adapté pour les modèles :Haut-parleurs - SA-VE312 (147.79 kb)