Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
Never use any accessories or par ts from other manufacturers accessories or par ts, your guarantee becomes invalid. Do not wind the mains cord round the appliance. If you use the appliance on color-treated hair, the straightening plates may stain. If the mains cord is damaged, you must have it replaced by persons in order to avoid a hazard. This appliance is not intended for use by persons (including children) with reduced physical, sensor y or mental capabilities, or lack of experience and knowledge, unless they have been given super vision or instruction concerning use of the appliance by a person responsible for their safety. Children should be super vised to ensure that they do not play with the appliance. For additional protection, we advise you to install a residual current device (RCD) in the electrical circuit that supplies the bathroom.This RCD must have a rated residual operating current not higher than 30mA. Ask your installer for advice. This appliance complies with all standards regarding electromagnetic "#$ evidence available today. Environment Do not throw away the appliance with the normal household waste at the end of its life, but hand it in an % help to preser ve the environment. 3 Straighten your hair Ensure that you select a temperature setting that is suitable for your hair. Always select a low setting when you use the straightener for Hair Type Temperature Setting Coarse, curly, hard-to-straighten " & (170°C and above) Fine, medium-textured or softly waved ' * " (160°C and below) Pale, blonde, bleached or color-treated Low (Below 160°C) 1 Connect the plug to a power supply socket. 2 Press and hold the button ( ) until the LCD screen lights up. »The default temperature setting is displayed on the LCD screen ( ). 3 Press the temperature buttons ( ) to select a suitable temperature setting for your hair. » When the straightening plates have heated up to the selected temperature, the indication ‘READY’ ( ) is displayed. » Note: If no button is pressed over 4 seconds, the key-lock function will activate automatically, with all the buttons on the appliance deactivated. When the key-lock function is activated, the key-lock indication ( ) is displayed on the LCD screen.To deactivate the key-lock function, slide and hold the key-lock button ( ) for 1.5 seconds. » Tip:To avoid unintentional switching of buttons during process, you can also activate the key-lock function manually by sliding and holding the key-lock button ( ). » Note:The appliance is equipped with an auto-shut off function. After 60 minutes, the appliance switches off automatically.You can re-star t the appliance by pressing and holding the button until the LCD screen lights up. 4 Slide the straightening plates lock ( ) to to unlock the plate arms. 5 Comb your hair and take a section that is not wider than 5cm for straightening. 6 Place it between the straightening plates ( ) and press the plate arms together. 7 Slide the straightener down the length of the hair in a single motion (max. 5 seconds) from root to end, without stopping to prevent overheating. ; <= > * (or outwards) when it reaches the hair ends. Hold the straightener in that position for 2 to 3 seconds, and then release it. 8 After 20 seconds, repeat step 6 and 7 until you achieve the desired look. 9 To straighten the rest of your hair, repeat steps 5 to 7. 10 To re-style your hair, press and hold style refresh button ( for 3 seconds to switch on the touch-up function.This function ensures the right result with a reduced temperature and better protection. » When the function is on, the indication “STYLE REFRESH” ) is displayed and the temperature indication disappears. 11 Press the style refresh button again, and the previous straightening temperature setting appears. ) ( . . After use: 1 Deactivate the key-lock function by sliding and holding the key- lock button ( ) for 1.5 seconds. 2 Switch off the appliance and unplug it. 3 Place it on a heat-resistant surface until it cools down. 4 Clean the appliance and straightening plates with damp cloth. 5 Lock the straightening plates by closing the plate arms and sliding the plates lock to 6 Keep it in a safe and dr y place, free of dust.You can also hang it with the hanging loop ( ). 4 Guarantee and service If you need information e.g. about replacement of an attachment or if you have a problem, please visit the Philips website at t or contact the Philips Customer Care Centre in your countr y.The phone number is in the worldwide < ? ? ? countr y, go to your local Philips dealer. Troubleshooting Problem Cause Solution The appliance The power socket to Ensure the socket is live. does not which the appliancework at all. has been connected may not live. Key-lock function is Deactivate the key-lock activated function by sliding and holding the key-lock button for 1.5 seconds. The mains cord of the ap...