Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
• Children should be super vised to ensure that they do not play with the appliance. • For additional protection, we advise you to install a residual current device (RCD) in the electrical circuit that supplies the bathroom. This RCD must have a rated residual operating current not higher than 30mA. Ask your installer for advice. Electromagnetic fields (EMF) This appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. Environment Do not throw away the appliance with the normal household waste at the end of its life, but hand it in an official collection point for recycling. By doing this, you help to preser ve the environment. Style your hair Caution: If the appliance is used on young children’s hair, it must be operated by a responsible adult. Older children must be instructed and super vised when they use the appliance. Keep the appliance out of the reach of young children. Note: Do not change the attachments or styler when the appliance is heating up or when it is hot. Let the appliance heat up for 5-15 minutes for a perfect result. Do not pull at the curler when you unwind the section, otherwise you would straighten the curl. Select a suitable attachment and styler for the hairstyle you want. Hairstyle Attachment and Styler Large rounded Large curling attachment ( ) curls Triangular curls Triangle attachment ( ) Large ringlets Large curling attachment ( ) and Slide-on spiral ( ) Crimps Crimping/straightening attachment ( ) and Crimping/straightening plates ( ) with the cur ved sides ( ) pointing towards each other Straight sleek Crimping/straightening attachment ( ) and style and flicks Crimping/straightening plates ( ) with the flat sides ( ) pointing towards each other Before you style your hair: 1 Slide a suitable attachment onto the handle ( ) and turn the ring ( ) to lock it ( ). • To disconnect the attachment, unlock it ( ) and pull it off. 2 Slide crimping/straightening plates ( ) onto the attachment ( ). • To remove the plate, grab the cool tips ( ) and pull it off. 3 Place the appliance with the suppor t ( ) outwards on a heat- resistant surface. 4 Connect the plug to a power supply socket. » The power-on indicator ( ) lights up. » When the appliance is ready for use, the ready indicator ( ) changes color. 5 Comb your hair and divide your hair into small sections that are not wider than 5cm. 6 Move the suppor t backwards. Create large curls, triangular curls, or large ringlets 1 Press the lever ( ) to open the clip ( ) and place a section of hair between the clip and barrel ( ). 2 Release the lever and slide the barrel to the hair tip. 3 Hold the cool tip ( ) and the handle, and then wind the section of hair round the barrel from end to root. • If you use the attachment with the spiral, wind the section of hair round the barrel following the spiral profile. 4 Hold the barrel in the position for max. 15 seconds, and then unwind the section of hair until you can open the clip again with the lever or until you can remove the spiral from your hair. 5 To style the rest of your hair, repeat steps 1 to 4. Create crimps 1 Press the lever ( ) to open the attachment and place a section of hair between the crimping plates. Star t crimping at the roots. 2 Release the lever and keep the plates together for 5 to 10 seconds. 3 Press the lever to open the attachment and place a lower area of the same section of hair between the plates. Make sure there is an overlap. 4 Repeat this process until you have reached the hair tip. 5 To style the rest of your hair, repeat steps 1 to 4. Create straight sleek style and flicks 1 Press the lever ( ) to open the attachment and place a section of hair between the straightening plates. 2 Slide the styler down the length of the hair in a single motion (max. 5 seconds) from root to end, without stopping to prevent overheating. • To create the desired type of flick, turn the styler half-circle inwards (or outwards) when reach the last 3-5 cm of the hair tip. Hold the styler in that position for 2 to 3 seconds, and then release it. 3 After 20 seconds, repeat step 2 until you achieve the desired look. 4 To style the rest of your hair, repeat steps 1 to 3. After use: 1 Unplug the appliance. 2 Place it on a heat-resistant surface until it cools down. 3 Remove hairs and dust from the appliance and attachments. 4 Clean the appliance, plates, and curling tongs by damp cloth. 5 Keep the appliance in a safe and dr y place, free of dust.You can also store the appliance in the supplied storage bag. 3 Guarantee and service If you need information or if you have a problem, please visit the Philips website at or contact the Philips Customer Care Centre in your countr y (you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your countr y, go to your local Phili...