Évaluations - 3, GPA: 4.3
(
)
)
|
Facilité d'utilisation
Safety is foremost---both your own and that of other people. Many important safety instructions are provided in this instruction and your appliance. Always read and observe all safety instructions. 1 Remove pedestal, installation hardware, and instructions from the shipping carton. 2 Position the washer/combo on top of the pedestal. NOTE: Because of the weight of the washer/combo, two or more people may be needed. NOTE: If the washer or combo was previously installed, unplug it, disconnect the inlet hose (s) from the faucet (s), disconnect the drain hose, and drain all hoses. 4 Remove the paper from the bracket. 5 Attach the double-faced tape of the bracket to the washer/combo as shown so the bent parts of the brackets align with the edge and can be attached to the pedestal with screws. NOTE: Attach the lower side first. 6 Be sure to press the adhesive parts of the brackets firmly to the appliance. 7 Install the eight (8) screws (supplied) to attach the brackets to the pedestal. 8 Move the washer/combo to the desired place. NOTE: The appliance and pedestal assembly must be placed on a solid and level floor for proper operation. Adjust the legs of the appliance and pedestal by turning with a wrench. Then, adjust the lock nut toward the pedestal while holding the pedestal leg using a wrench. The installer must have electrical and mechanical training and acceptable knowledge in the required work. Excessive Weight Hazard Two or more people may be needed to install and move the appliance and pedestal assembly. Do not allow children to play on the drawer. Do not step on the handle. NOTICE W WASHER/COMBO INSTALLATION ARNING for washer/ combo for dryer for washer/ combo for dryer 2 FRANCAIS ENGLISH 5 Attach the double-faced tape of the bracket to the washer/combo as shown so the bent parts of the brackets align with the edge and can be attached to the pedestal with screws. NOTE: Attach the lower side first. 4 Remove the paper from the bracket. 3 Level the washer/combo on the pedestal by adjusting the feet. Lock nut Adjustable feet Adjustable feet Adjustable feet Higher Lower 3 1 Remove pedestal, installation hardware, and instructions from the shipping carton. 2 Position dryer on top of the pedestal. NOTE: Because of the weight of the dryer, two or more people may be needed. NOTE: If dryer was previously installed, uninstall it as follows: A. Uninstalling an electric dryer: 1) Unplug the power supply cord, 2) Pull the dryer away from the wall enough to loosen the vent clamp. Loosen the clamp and carefully remove the exhaust vent from the dryer exhaust outlet. B. Uninstalling a gas dryer: 1) Unplug power supply cord. 2) Turn off the gas supply. 3) Pull the dryer away from the wall enough to loosen the vent clamp. Loosen the clamp and carefully remove the exhaust vent from the dryer exhaust outlet. 3 Remove the paper from the bracket. for washer/ combo for washer/ combo for dryer for dryer DRYER INSTALLATION for washer/ combo for dryer for dryer for washer/ combo 6 Be sure to press the adhesive parts of the brackets firmly to the appliance. 7 Install the eight (8) screws (supplied) to attach the brackets to the pedestal. 8 Move the washer/combo to the desired place. NOTE: The appliance and pedestal assembly must be placed on a solid and level floor for proper operation. Adjust the legs of the appliance and pedestal by turning with a wrench. Then, adjust the lock nut toward the pedestal while holding the pedestal leg using a wrench. Lock nut Adjustable feet Adjustable feet Adjustable feet Higher Lower ENGLISH 4 ENGLISH 4 Attach the double-faced tape of the bracket to the dryer as shown so the bent parts of the brackets align with the edge and can be attached to the pedestal with screws. NOTE: Attach the lower side first. 5 Be sure to press the adhesive parts of the brackets firmly to the appliance. 6 Install the eight (8) screws(supplied) to attach the brackets to the pedestal. 7 Move the dryer to the desired place. NOTE: The appliance and pedestal assembly must be placed on a solid and level floor for proper operation. Adjust the legs of the appliance and pedestal by turning with a wrench. Then, adjust the lock unt toward the pedestal while holding the pedestal leg using a wrench. Lock nut Adjustable feet Adjustable feet Adjustable feet Higher Lower WARRANTY LG Electronics Inc., Will repair or at its option replace, without charge, your product if it proves to be defective material or workmanship under normal use during the warranty period set forth below, effective from the date of original consumer purchase of the product. This limited warranty is good only to the original purchaser of the product and effective only when used in the United states including Alaska, Hawail, and U.S. Territories; and Canada. WARRANTY PERIOD: HOW SERVICE IS HANDLED: Call 1-800-243-0000 (USA) or 1-888-LGCANADA and choose the 1Year from the Date of Purchase. appropriate prompt. Please have product type, model number, serial number, and Z...