Évaluations - 2, GPA: 4.5 ( )

Fabricant : Alliance Laundry Systems Taille : 3.79 mb Nom Fichier : Langue d'enseignement:

The wash action consists of a period of tumbling in one direction, a brief pause, and then a reverse tumble in the opposite direction. The pauses are part of the tumble action and add to the unique cleaning capabilities of the washer. They are part of the cycle. NOTE: There will be extended pauses when Boosted Hot Wash, if available, is selected because the water is being heated. To Change Cycles If the selected cycle is not the correct cycle for the fabric being washed, you may change the cycle selection at any time until the first wash fill is complete. Once the washer has filled for the first part of the cycle (the wash portion), the current cycle must be aborted and a new cycle must be started. To change the cycle before the first fill is complete: Change the cycle selected on the cycle selector knob. To change the cycle after the first fill is complete and before the first wash is complete: 1. Abort the current cycle by changing the cycle selector knob to the OFF position. 2. Set the WASH/RINSE temperature selector. 3. Set cycle selector knob. 4. Turn on extra rinse, if desired. 5. Press and hold the START button for two seconds. To change the cycle after the first wash is complete: NOTE: This should only be done if the speed of the final extract is incorrect for the fabric being washed. For example, if washing delicate items on the REGULAR cycle, the high speed extract may damage the fabric. Or, if washing towels or jeans on the DELICATE cycle, the lower speed extract would increase drying time. 1. Abort the current cycle by changing the cycle selector switch to the OFF position. 2. Restart the cycle from the beginning. Refer to the To Wash Clothes section. To Pump Out Water After Aborting Cycle Run a SPIN ONLY cycle. This cycle will perform a high speed extract operation that will pump all of the water out of the washer. Manual Soaking If items need to be added or removed after a cycle has started, turn the cycle selector knob to the OFF position. Wait until the DOOR light goes off (approximately 45 seconds after cycle has been stopped), open door, add or remove items, and start the cycle again. There is no agitator on this washer. Instead, the clothing gently tumbles through the water. The wash action consists of a period of tumbling in one direction, a brief pause, and then a reverse tumble in the opposite direction. The pauses are part of the tumble action and add to the unique cleaning capabilities of the washer. They are part of the cycle. NOTE: There will be extended pauses when Boosted Hot Wash, if available, is selected because the water is being heated. To Change Cycles If the selected cycle is not the correct cycle for the fabric being washed, you may change the cycle selection at any time until the first wash fill is complete. Once the washer has filled for the first part of the cycle (the wash portion), the current cycle must be aborted and a new cycle must be started. To change the cycle before the first fill is complete: Chan...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :