Évaluations - 3, GPA: 4.7
(
)
)
|
Facilité d'utilisation
(Only a 1 degrees angle is allowed.) 3 Installing the Washing Machine Removing the shipping bolts To remove the bolts: Before using the washing machine, you must remove all of the shipping bolts from the back of the unit. 1. Loosen all bolts with the wrench before removing them. 2. Take each bolt head and pull it through the wide part of the hole. Repeat for each bolt. 3. Fill the holes with the supplied plastic covers. 4. Keep the shipping bolts for future use. Connecting the water supply hose The water supply hose must be connected to the washing machine at one end and to the water faucet at the other. Do not stretch the water supply hose. If the hose is too short and you do not wish to move the water faucet, replace the hose with a longer, high pressure hose. To connect the water supply hose: 1. Take the L-shaped arm fitting for the cold water supply hose and connect to the cold water supply intake on the back of the machine. Tighten by hand. 2. Connect the other end of the cold water supply hose to your sink's cold water faucet and tighten it by hand. If necessary, you can reposition the water supply hose at the washing machine end by loosening the fitting, rotating the hose, and retightening the fitting. Positioning the drain hose The end of the drain hose may be positioned in three ways: Over the edge of a sink The drain hose must be placed at a height of between 60 and 90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure the guide to the wall with a hook or to the faucet with a piece of string to prevent the drain hose from moving. ln a sink drain pipe branch The drain pipe branch must be above the sink siphon so that the end of the hose is at least 60 cm above the ground. ln a drain pipe Samsung recommends that you use a 65 cm high vertical pipe; it must be no shorter than 60 cm and no longer than 90 cm. 4 Washing a Load of Laundry Overview of the control panel 321 4 5 6 7 8 9 1. Detergent dispenser 2. Display panel Displays wash cycle and error messages. During execution of the program, the program indicator blinks. 3. Program Select button Press the button repeatedly to select one of the six available wash program. Cotton > Colour > Synthetics > Delicates > Wool > Quick > Rinse+Spin > Spin 4. Temperature selection button Press the button repeatedly to cycle through the available water temperature options (cold , 30.C, 40.C , 60.C and 95.C). When pressing this button during washing, you can see the selected temperature in the display panel. 5. Spin selection button Press the button repeatedly to cycle through the available spin speed options. J1453 (V/S) no spin, 400, 800, 1200, 1400 rpm J1253 (V/S) no spin, 400, 800, 1000, 1200 rpm J1053 (V/S) no spin, 600, 800, 1000 rpm J853 (V/S) no spin, 600, 800 rpm When pressing this button during operation, you can see the selected spin speed in the display panel. When all buttons are turned off NO SPIN. 6. Option button Press the button repeatedly to cycle through the available partial wash options Prewash > Rinse+ > Rinse Hold > Prewash +Rinse+ > Prewash +Rinse Hold > Rinse+ +Rinse Hold > Prewash +Rinse+ +Rinse Hold > Cancle Note : Prewash is only available when washing cotton, synthetic or delicate. 7. Delay Start selection button Press this button repeatedly to rotate between the retarded start options available. (from 1 hour to 24hour, in 1 hour increments) 8. Start/Pause button Press to pause and restart programs. 9. (On/Off) button Press once to turn the washing machine on, press again to turn the washing machine off. If the washing machine power is left on for longer than 10 minutes without any buttons being touched, the power automatically turns off. . What is the “Child Lock” function? -If you press the “Child Lock” button(Spin+Option button) longer than 2 sec during operation, this function is selected. - If once this function is selected, no change can be done until the end of laundry. -Press the “Child Lock” button(Spin+Option button) longer than 2 sec to cancel the function. 5 Washing a Load of Laundry WM stops the current step of the cycle or does not proceed to the nextstep of washing (indication of remain time on LED display may increase). Your new washing machine is equipped with Fuzzy Logic system, which not only sets the optimum level of water and other parameters of washing, but also controls the washing process as well as makes necessary corrections in order to provide better washing results. In the above- mentioned matter, the Fuzzy Logic system has detected deviations in washing cycle such as: high quantity of detergent at the end of the cycle, high vibration level while spinning, etc.You can adjust existing wash programs, i.e. change wash temperature and spin speed. After detection of such abnormalities, the washing machine is suspending the normal course of program in order to normalize these parameters and continue the cycle. Fuzzy logic system makes 7 attempts to eliminate such deviations. If it is...
Ce manuel est également adapté pour les modèles :Rondelles - J1253 (258.18 kb)
Rondelles - J1253S (258.18 kb)
Rondelles - J1453 (258.18 kb)
Rondelles - J853 (258.18 kb)