Évaluations - 2, GPA: 3.5
(
)
)
|
Facilité d'utilisation
Unplug the washing machine from the power supply. 2. Remove the base cover by using a screw driver to pry it off. 3. Unscrew the emergency drain cap by turning left. Grip the cap on the end of the emergency drain tube and slowly pull it out about 20 cm. 4. Allow all the water to flow into a bowl. 5. Reinsert the drain tube and screw the cap back on. 6. Replace the base cover. Repairing a frozen washing machine If the temperature drops below freezing and your washing machine is frozen: 1. Unplug the washing machine. 2. Pour warm water on the source faucet to loosen the water supply hose. 3. Remove the water supply hose and soak it in warm water. 4. Pour warm water into the washing machine drum and let it sit for 10 minutes. 5. Reconnect the water supply hose to the water faucet and check if the water supply and drain operations are normal. Cleaning the exterior 1. Wipe the washing machine surfaces, including the control panel, with a soft cloth and non-abrasive household detergents. 2. Use a soft cloth to dry the surfaces. 3. Do not pour water on the washing machine. Cleaning the detergent drawer and recess 1. Press the release lever on the inside of the detergent drawer and pull it out. 2. Remove the cap from compartment . 3. Remove the liquid detergent divider from compartment . 4. Wash all of the parts under running water. 5. Clean the drawer recess with an old toothbrush. 6. Reinsert the cap (pushing it firmly into place) and replace the liquid detergent divider into the drawer. 7. Push the drawer back into place. 8. Run a rinse program without any laundry in the drum. SAMSUNG Washing Machine Owner’s Instructions 11 Maintaining the Washing Machine Cleaning the debris filter Clean the debris filter 2 or 3 times a year. 1. Remove the base cover from the front of the washing machine. 2. Unscrew emergency drain cap by turning left and drain off all the water. See "Draining the washing machine in an emergency" on page 11. 3. Unscrew the filter cap and take it out. 4. Wash any dirt or other material from the filter. Make sure the drain pump propeller behind the filter is not blocked. Replace the filter cap. 5. Replace the base cover. Cleaning the water hose mesh filter You should clean the water hose mesh filter at least one time per year, or when the lamps on your machine flicker. To do this: 1. Turn off the water source to the washing machine. 2. Unscrew the hose from the back of the washing machine. 3. With a pair of pliers, gently pull out the mesh filter from the end of the hose and rinse it under water until clean. Also clean the inside and outside of the threaded connector. 4. Push the filter back into place. 5. Screw the hose back onto the washing machine. 6. Turn on the faucet and make sure the connections are watertight. 12 SAMSUNG Washing Machine Owner’s Instructions Troubleshooting Problems and solutions The washing machine will not start • Make sure the door is firmly closed. • Make sure the washing machine is plugged in. • Make sure the water source faucet is turned on. • Make sure to press the Start button. No water or insufficient water supply • Make sure the water source faucet is turned on. • Make sure the water source hose is not frozen. • Make sure the water intake hose is not bent. • Make sure the filter on the water intake hose is not clogged. Detergent remains in the detergent drawer after the wash program is complete • Make sure the washing machine is running with sufficient water pressure. • Put the detergents in the inner parts of the detergent drawer(away from the outside edges). Washing machine vibrates or is too noisy • Make sure the washing machine is set on a level surface. If the surface is not level, adjust the washing machine feet to level the appliance (see page 3). • Make sure that the shipping bolts are removed (see page 3). • Make sure the washing machine is not touching any other object. • Make sure the laundry load is balanced. The washing machine does not drain and/or spin • Make sure the drain hose is not squashed or bent. • Make sure the water hose mesh filter is not clogged (see page 12). Understanding error messages The appliance is equipped with automatic safety functions able to quickly identify and indicate the presence of faults and react appropriately. Most faults are minor problems that can be solved quickly. Depending on the model you purchased, some lamps in the buttons may flicker. If they do, check the follwing: Error displayed Solution Close the door. • Make sure the source water faucet is turned on. • Check the water pressure. • Clean the debris filter. • Make sure the drainage hose is installed correctly. Laundry load is unbalanced; loosen any tangled laundry. M1201/1100/ M601 1000/800 If only one item of clothing needs washing, such as a bathrobe or jeans, the final spin result might be unsatisfactory and an "Unbalancing" error message will be shown in the display window. Before contacting After-Sales service: 1. Try to remedy the problem (See "Trouble...
Ce manuel est également adapté pour les modèles :Rondelles - M1001 (743.89 kb)
Rondelles - M1201 (743.89 kb)