Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
If you press and hold the ......(Finished in)..option button, the appliance automatically runs through the settings options. Press..Start/Reload3 Switch off the appliance Turn the programme selector to Off. Turn the tap off Not required for AquaStop models a Installation instructions, page 7. Remove the washing Open the washing machine door and remove the washing. If (Rinse Hold) = no Final spin is active: Turn the programme selector to ....Empty or ..Spin. Select spin speed where necessary. Press ..Start/Reload. . Remove any foreign objects -risk of rusting. . Leave the washing machine door and detergent drawer open so that any residual water can dry away. Programme has ended when ... ... ....Start/Reload is off and appears in the display panel. Cancel the programme Programmes at high temperatures: . To cool the laundry down: Select ......Rinse. . Select ..Start/Reload. Programmes at lower temperatures: . Select Spin or ....Empty. . Select ..Start/Reload. Change the programme, if ... ... you have selected the wrong programme by mistake: . Reselect the programme. . Select ..Start/Reload.The new programme starts from scratch. Reloading laundry, if ... a page 5 ..Start/Reload is selected, and then YES lights up in the display panel and $ Start/Reload flashes. If NO lights up, the door cannot be opened. Do not leave the washing machine door open for a prolonged period, as water from the laundry could leak out. Select ..Start/Reload 3 4 56Individual settings ..Audible signal ....Start/Reload To start the programme or to subsequently load additional laundry, and to activate/deactivate the childproof lock. 2. Set the volume for ... 1. Activate the mode for setting the signal volume Set to . 1 step, the display panel lights up Press and hold + 1 step, release Set to .skip Button signals Information signals Set the volume* 1 step Set the volume* * you may need to select the function several times. Individual settings ..Options buttons The spin speed and temperature can be changed before and during the selected programme runs. Effects depend on the programme progress. ..°C..(Temperature) The washing temperature displayed can be modified. The maximum washing temperature that can be selected depends on the programme that has been set. ......(Finished in) When you select the programme, the relevant programme duration is displayed. You can delay the start of the programme before it begins. The (Finished in) time can be set in increments of one hour up to a maximum of 24 hours. Press the ..button repeatedly until the desired number of hours is displayed (h = hours). ..Start/Reload. ..(Spin speed/ ....(Rinse Hold = no Final spin) You can change the spin speed displayed or select ....(Rinse Hold = no Final spin, laundry remains in the water after the final rinse display panel). The maximum selectable spin speed depends on the model and on which programme is currently selected. ..Additional functions ..and overview of programmes, page 7 ..SpeedPerfect Washes in a shorter time but with a washing outcome comparable to that of the standard programme. Maximum load ..Overview of programmes, page 7. ..EcoPerfect For saving energy with a washing performance comparable to that of the standard programme. Easy-iron ..Special spin sequence with subsequent fluffing. Gentle Final spin at reduced speed -residual moisture in the laundry slightly increased. Rinse Plus ..Extra rinse for areas with very soft water or for further enhancing the washing results. ..Childproof lock and reloading Childlock/ appliance lock You can lock the washing machine to prevent the functions you have set from being changed inadvertently. To activate/deactivate: After the programme has started/finished, press and hold Start/Nachlegen Start/Reload for 5 seconds. Note: the Childlock remains activated until the start of the next programme, even after the machine has been switched off. Then deactivate the Childlock after the machine has been switched back on. YES Reload If you want to add subsequent items of laundry after the programme has started, press ..Start/Reload. The machine checks whether reloading is possible. If YES lights up and ..Start/Reload flashes, reloading is possible. NO flashing: wait until YES lights up. Note: do not open the door until YES lights up. NO: reloading not possible. Note: for safety reasons, the washing machine door remains locked when the water level and/or temperature is high, or during a spin cycle. To continue the programme, press ..Start/Reload. 56Individual settings ..Audible signal ....Start/Reload To start the programme or to subsequently load additional laundry, and to activate/deactivate the childproof lock. 2. Set the volume for ... 1. Activate the mode for setting the signal volume Set to . 1 step, the display panel lights up Press and hold + 1 step, release Set to .skip Button signals Information signals Set the volume* 1 step Set the volume* * you may need to select the function several times. Individual settings ..Opt...
Ce manuel est également adapté pour les modèles :Rondelles - WAS24443IL/04 (1.92 mb)
Rondelles - WAS24443IL/06 (1.92 mb)
Rondelles - WAS24443IL/07 (1.92 mb)
Rondelles - WAS24443IL/08 (1.92 mb)