Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
Also for subsequent drying. ....Cold max. 3 kg All types of fabrics. For freshening up or airing of items of laundry that have been worn for a short period of time. ....Shirts/Business max. 3 kg Cotton or linen fabrics that are still damp and easy-care fabrics. Creasing in fabrics is reduced. Fabrics are not dried completely. Hang up fabrics! ....Super 40’ max. 2 kg Laundry made of synthetic fibres, cotton or blended fabrics (for example) that needs to be dried quickly. The values may differ from the those specified depending on the type of fabric, mixture of laundry to be dried, residual moisture in the fabric and loading capacity. ....Woollen finish max. 3 kg Woollen fabrics suitable for washers. Fabrics become fluffier but not dry. Remove fabrics once the programme has ended and allow to dry. ....Lingerie max. 1 kg Lingerie made of synthetic fibres, cotton or blended fabric. *Dryness levels can be selected individually .. ....Cupboard Dry Extra, ....Cupboard Dry and ....Easy Iron (depending on the model). Degree of dryness can be finely adjusted; multi-layered textiles require a longer drying time than single-layered items of clothing. Recommendation: Dry separately. 9303 / 9000811360 *811360* Siemens Electrogerate GmbH Carl-Wery-Str. 34 81739 Munchen/Deutschland WT34A201IL 8 Care and cleaning Dryer housing and control panel – Wipe clean with a soft, damp cloth. – Do not clean with a water jet. – Remove detergent and cleaning agent residue immediately. Exhaust air duct ..Exhaust air duct installation instruction. Check the exhaust air duct as it may be clogged. Clean the exhaust air duct at regular intervals, e.g. every six months. Do not bend the exhaust air duct. 1. Switch off the dryer and allow it to cool down. 2. Disconnect the mains plug. 3. Remove the exhaust air duct. 4. Clean the exhaust air duct. 5. Refit the exhaust air duct. Moisture sensors The dryer is equipped with stainless steel moisture sensors. Moisture sensors measure the moisture level of the laundry. After sustained, repeated operation, a fine layer of limescale may form on the moisture sensors. 1. Open the door. 2. Clean the moisture sensors with a damp sponge which has a rough surface. Do not use steel wool or abrasive agents! Only when the appliance is switched off. 8 Care and cleaning Dryer housing and control panel – Wipe clean with a soft, damp cloth. – Do not clean with a water jet. – Remove detergent and cleaning agent residue immediately. Exhaust air duct ..Exhaust air duct installation instruction. Check the exhaust air duct as it may be clogged. Clean the exhaust air duct at regular intervals, e.g. every six months. Do not bend the exhaust air duct. 1. Switch off the dryer and allow it to cool down. 2. Disconnect the mains plug. 3. Remove the exhaust air duct. 4. Clean the exhaust air duct. 5. Refit the exhaust air duct. Moisture sensors The dryer is equipped with stainless steel moisture sensors. Moisture sensors measure the moisture level of the laundry. After sustained, repeated operation, a fine layer of limescale may form on the moisture sensors. 1. Open the door. 2. Clean the moisture sensors with a damp sponge which has a rough surface. Do not use steel wool or abrasive agents! Only when the appliance is switched off. 9 Installation – Scope of delivery: dryer, operating and installation instructions, basket for woollens (depending on the model). – Check the dryer for transport damage. – The dryer is very heavy. Do not attempt to lift it on your own. – Be careful to avoid sharp edges. – Do not lift the dryer by protruding parts (e.g. the door) -risk of breakage. – Do not set up in a room that is susceptible to frost. Freezing water may cause damage. – If in doubt, have the appliance connected by a specialist. Setting up the dryer – The mains plug must always be accessible. – Ensure that the appliance is placed on a clean, level and firm surface. – Install the exhaust air duct ..Exhaust air duct installation instruction. – Keep the area around the dryer clean. – Level the dryer using the threaded feet and a spirit level. Never remove the threaded feet! For mains connection, see Safety instructions ..page 13. – Connect to an AC earthed socket. If in doubt have the socket checked by a specialist. – The mains voltage and the voltage shown on the rating plate (..page 10) must be the same. – The connected load and necessary fuse protection are specified on the rating plate. 1. Take all accessory parts out of the drum. The drum must be empty. Clean and level. Do not install the dryer behind a door or sliding door which could prevent or obstruct the dryer door from opening. This will prevent children from locking themselves in and risking their lives. 2. 10 Optional accessories Exhaust air duct set The exhaust air is extracted via a hose. Washer-dryer stack connection set The dryer can be placed on top of a suitable washing machine with the same width and depth to save space. This connection set must always be used to secur...