Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
Danger to life On redundant appliances: – Pull out the mains plug! – Sever the power cord and discard together with the plug. – Destroy the lock on the washing-machine door. This will prevent children from locking themselves in and suffocating. Risk of suffocation – Keep packaging, plastic film and packaging parts out of the reach of children. Risk of poisioning – Keep detergents and care products out of the reach of children. Risk of explosion – Caused by detergents containing solvents, e.g. stain remover/ items of washing pretreated with solvent naphtha may result in an explosion after being loaded into the washing machine. Before hand thoroughly rinse items of washing by hand. Risk of injury – Washing machine door may become very hot. – Caution when draining hot detergent solution. – Do not climb on the washing machine. – Do not lean on the open washing machine door. – Do not reach into the drum in case it is still rotating. Consumption values Programme Additonal function Load Current*** Water*** Programme duration*** algodon/algodao (Cottons) 40 °C* .. eco+ 7 kg 0.85 kWh 75 l 2:12 h algodon/algodao (Cottons) 60 °C* .. eco+ 7 kg 1.50 kWh 75 l 2:12 h algodon/algodao (Cottons) 90 °C .. eco+ 7 kg 2.51 kWh 90 l 2:12 h sinteticos (Easy-Care) 40 °C* .. eco+ 3.5 kg 0.55 kWh 55 l 1:12 h .. lana/la 30 °C – 2 kg 0.20 kWh 40 l 0:36 h * Programme setting for test according to currently valid European standard 60456. Information about comparability tests: To test the test programmes, wash indicated load, with .. eco+ (Intensive Wash) additional function and at maximum selectable spin speed. As a short programme for coloureds, select the programme sinteticos (Easy-Care) 40 °C and the maximum spin speed. Programme Additonal function Load Annual energy consumption Annual water consumption algodon/algodao eco (Cottons eco) 40 °C/60 °C .. eco+ 7/3.5 kg 218 kWh 10560 l ** Programme setting for testing and energy labelling according to directive 2010/30/EU with cold water (15 °C). ***The values deviate from the indicated values depending on water pressure, water hardness, water inlet temperature, room temperature, type and amount of washing and degree of soiling, utilised detergent, fluctuations in the mains voltage and selected additional functions. 9 Insert for liquid detergent depending on model Position insert for dosing liquid detergent: – Completely remove detergent drawer. ....Page 10 – Push insert forwards. Do not use insert (push upwards): – For gel-like detergents and washing powders, – For programmes with .. prelav. (Prewash). Care .. Machine housing, control panel – Remove detergent residue immediately. – Wipe with a soft, damp cloth. – Do not clean the appliance with a water jet. Clean the detergent drawer ... ... if it contains detergent or fabric softener residue. 1. Pull out, depress insert, take out drawer all the way. 2. Take out insert: using your finger, press insert upwards. 3. Clean detergent dispenser and insert with water and a brush and dry. 4. Attach insert and lock into position (push cylinder onto guide pin). 5. Slide in the detergent dispenser. Leave detergent drawer open so that residual water can evaporate. .. Drum Leave washing machine door open so that the drum can dry out. Use chlorine-free cleaning agent, not steel wool. .. Descaling No washing in the machine! Not required if detergent dosed correctly. However, if this does occur, follow the instructions of the descaling agent manufacturer. Suitable descalers can be purchased on our website or from customer service. Information about the indicator lights depending on model A signal sounds and the indicator lamps for spin speed and status displays flash: ¤ ¤ ¤ ¤ ¤ ¤ ¤ ¤ ¤ Close the washing machine door properly; washing may be caught. ¤ ¤ ¤ ¤ ¤ ¤ ¤ ¤ ¤ Turn on tap fully, supply hose kinked/jammed; clean filter ....Page 10, water pressure too low. ¤ ¤ ¤ ¤ ¤ ¤ ¤ ¤ ¤ Drain pump blocked; clean drain pump. ....Page 10 Drainage hose/outlet pipe blocked; clean drainage hose on the siphon. ....Page 10 ¤ ¤ ¤ ¤ ¤ ¤ ¤ ¤ ¤ Water in the base pan, appliance leaking. Call customer service! ¤ ¤ ¤ ¤ ¤ ¤ ¤ ¤ ¤ or ¤ ¤ ¤ ¤ ¤ ¤ ¤ ¤ ¤ or ¤ ¤ ¤ ¤ ¤ ¤ ¤ ¤ ¤ Motor fault. Call customer service! Other displays: Switch off appliance, wait 5 seconds and switch on again. If the display is indicated again, call customer service. ....Installation Instructions – Risk of electric shock! Pull out the mains plug! – Risk of explosion! No solvents! 10 Maintenance Detergent-solution pump Set programme selector to .. stop (Off), pull out the mains plug. 1. Take the drainage hose out of the holder. Remove sealing cap, allow detergent solution to flow out. Put the closing cap back on the hose. 2. Carefully unscrew the pump cover (residual water). 3. Clean the interior, pump cover thread and pump housing (fan impeller in the detergent-solution pump must rotate). 4. Reinsert and screw on pump cover. Handle is upright. Insert the drain hose into the holder. To prevent unused detergent...