There should be slight downward pressure. 3. Loosen the bolts from the rear of the subframe boots and swing bolt up into lock position. 17 Removing the Loader from Your Tractor (Continued) 4. Roll back the bucket slightly and simultaneously extend or retract the lift cylinders to free hooks from spools. Then slowly back up the tractor. 5. Once the subframe is clear of the boot and the hook is clear of the mounting boss, roll back the bucket all the way. This raises the rear uprights of the loade

1. Raise loader to provide clearance to engage both parking stands. Shut off tractor. Standing along the outside of the loader arms remove parking stands from storage position and engage within the loader mainframe. buhler Allied Front-End Loader - 20 - P4094 2. Lower attachment level to the ground while engaging float position. Ensure attachment rests firmly on ground with minimal downward pressure. If required extend bucket cylinders to rotate upright rearward. At this stage the pin should hav

Cross Tube 2 2 2 2 7 113031 Tubing Lift Cyl. Common (23.0) 1 1 1 1 8 115910 Tubing Lift Cyl. Common (15.0) 1 1 1 1 9 115915 Tubing Bucket Cyl. Top/Dump --1 1 9 115913 Tubing Bucket Cyl. Top/Dump 1 1 -- 10 115916 Tubing Bucket Cyl. Bottom/Rollback --1 1 10 115914 Tubing Bucket Cyl. Bottom/Rollback 1 1 -- 11 114921 Tubing Lift Cyl. Top/Drop --1 1 11 114485 Tubing Lift Cyl. Top/Drop 1 1 -- 12 114922 Tubing Lift Cyl. Bottom/Raise --1 1 12 114486 Tubing Lift Cyl. Bottom/Raise 1 1 -- 13 11362 Clip Pip