Évaluations - 2, GPA: 4
(
)
)
|
Facilité d'utilisation
Before Operating Tool 1. Read and understand these operating instructions before operating tool. 2. Only well-instructed adults should operate tool. Never allow children to operate tool. 3. Do not operate tool • where highly flammable liquids or gases are present • while under the influence of alcohol, medication, or drugs • if exposed to rain or in damp or wet areas • while tired or in a hurry • if tool is damaged or malfunctions 4. To reduce the risk of electric shock, this tool has a polarized plug (one blade is wider than the other) and will require the use of a polarized wall outlet or extension cord. The plug will fit into a wall outlet or polarized extension cord only one way. If the plug does not fit fully into the wall outlet or extension cord, reverse the plug. If the plug still does not fit, obtain a correct polarized extension cord and contact a qualified electrician to install the proper wall outlet. Do not change the tool plug, extension cord receptacle, or extension cord plug in any way. 5. Use only extension cords marked for outdoor use. 6. Never use this tool • where a heavy-duty tool is needed • where not intended. For example, don’t use tool on concrete, metal, or glass 7. Wear snug-fitting clothing when operating tool. Do not wear loose clothing or jewelry. They can get caught in moving parts. 8. Wear the following safety gear when operating tool: • rubber gloves (outdoors) • footwear with non-skid soles (outdoors) • eyeprotectionsuchassafetyglassesorgoggleswhichmeetorexceedANSI standards. Make sure all bystanders also wear proper eye protection. • hair covering to contain long hair 9. Keep work area well lit. 10. Toggle power switch to the OFF (0) position and unplug tool • when loading tool • when not in use • when moving from one place to another • before maintenance • when changing accessories 11. Do not alter this tool in any way. Only use accessories designed for this tool. 116261 2 During Operation of Tool 1. Keep all parts of body away from staple/nail exit on tool. 2. Never point tool at anyone. 3. Keep children, animals, and bystanders away from tool and extension cord at all times. Only tool user should be in work area. 4. Stay alert. Use common sense while operating tool. 5. Keep power switch in the OFF (0) position and finger off trigger until ready to drive staple/nail. 6. Keep work area clean. Cluttered work areas invite injuries. 7. Secure work before using tool. Use both hands to operate tool. 8. Do not touch any metal part of tool when stapling/nailing into areas where electrical wiring may be present. These areas include walls, floors, and ceilings. If staple/nail contacts electrical wire, electric shock may occur. 9. Avoid body contact with grounded objects such as pipes, fences, and metal posts. 10. Do not force tool. Use tool at rate for which it was designed. 11. Do not overreach. Keep proper footing and balance at all times. 12. Carry tool from one place to another • with tool unplugged • with power switch in the OFF (0) position • with finger off the trigger General 1. Inspect tool before and after each use. Check for any damage that may affect operator safety or operation of tool. Check for broken or damaged parts. Do not use tool if damage affects safety or operation. 2. Maintain tool with care. • Never fire tool when empty of staples/nails. This may damage tool. • Keep tool clean. • Keep handles dry, clean, and free of oil and grease. • Inspect power cord often. • Never carry tool by power cord. • Never yank power cord to unplug it. • Keep power cord away from heat, oil, and sharp edges. • Inspect extension cords often and replace if damaged. • Never oil or grease any part of tool. • Do not attempt to repair tool or replace broken parts. 3. Always store tool • with staples/nails removed from magazine • out of children’s reach • in a high or locked place that is dry Keep these operating instructions for reference. It is your guide to safe and proper operation of this tool. 116261 3 Product Identification Power Cord Staple/Nail Magazine Safety Lock Staple/Nail Exit Trigger Hand Grip Head Staple/Nail View Window Magazine Latch Lock ON/OFF Power Switch Product Features The PowerFast® Electric Staple/Nailgun is a multi-purpose tool. This tool is designed for home and workshop. It performs basic fastening jobs including installing insulation, porch screening, and ceiling tiles, repairing upholstery, and hobby/craft work. It will also fasten quarter round, trim work and base boards as well as light woodworking tasks (Example: frames for pictures or artwork). • Safety Nose Piece • Easy Side-Load Magazine • Protective Soft Tip • 10 Foot Power Cord • Soft Grip Handle • Fires up to 1" Heavy Duty 19 Guage Staples (91 Series) and 1 1/4" 18 Guage Brad Nails. 116261 4 Extension Cords CAUTION: Use only extension cords marked for outdoor use. WARNING: Inspect extension cords often and replace if damaged. 5116261www.desatech.co...