Évaluations - 1, GPA: 5
(
)
)
|
Facilité d'utilisation
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury, death and/or property damage! Retain instructions for future reference. BUILT TO LAST Narrow Crown Stapler Table of Contents General Safety . . . . . . . . . . . . .1-3 Specifications . . . . . . . . . . . . . . .2 Operating The Tool . . . . . . . . .3-5 Operational Mode . . . . . . . . . . .4 Troubleshooting . . . . . . . . . . . . .7 Warranty . . . . . . . . . . . . . . . . . . .8 Description This stapler is designed for cabinetry, casebacks, decorative trim and crafts. Features include: no-mar tip, adjustable exhaust, single sequential trigger, quick clear nose, and an adjustable depth of drive mechanism. General Safety Information CALIFORNIA PROPOSITION 65 You ! WARNING can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry. This dust often contains chemicals known to cause cancer, birth defects, or other reproductive harm. Wear protective gear. ! WARNING This product or its power cord contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. This manual contains safety, operational and maintenance information. Contact your Campbell Hausfeld representative if you have any questions. OPERATOR’S RESPONSIBILITY: The tool operator is responsible for: • Reading and understanding tool labels and manual. • Selecting an appropriate tool actuation system, taking into consideration the work application for which the tool is used. • The safe use of the tool. • Ensuring that the tool is used only when the operator and all other personnel in the work area are wearing ANSI Z87 eye protection equipment, and when required, other appropriate protection equipment such as head, hearing and foot protection equipment. Serious eye or permanent hearing loss could result. • Assuring that the tool is kept in safe working order as described in this manual. EMPLOYER’S RESPONSIBILITY: • Selecting an appropriate tool actuation system, taking into consideration the work application for which the tool is used. • Ensuring that this manual is available to operators and personnel performing maintenance. • The safe use of the tool. • Enforcing that the tool is used only when the operator and all other personnel in the work area are wearing ANSI Z87 eye protection equipment, and when required, other appropriate protec- Model CHN10302 Locate model and date code on tool magazine and under nozzle shield, and record below: Model No. ________________________ Date Code.________________ Retain these numbers for future reference. tion equipment such as head, hearing and foot protection equipment. Serious eye or permanent hearing loss could result. • Assuring that the tool is kept in safe working order as described in this manual. • Assuring the proper maintenance of all tools in employer’s possession. • Ensuring that tools which require repair are not further used before repair. Tags and physical segregation are recommended means of control. REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping. Campbell Hausfeld Tools meet or exceed For parts, product & service information IN700501AV 8/07Industries’ Standards as set forth by the visit American National Standard Institute/International Staple, Nail and Tool Association in ANSI/ISANTA SNT-101-2002. © 2007 Campbell Hausfeld/Scott Fetzer 2 General Safety Information (Continued) Danger indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Read and understand tool labels and manual. Failure to follow warnings, dangers, and cautions could result in DEATH or SERIOUS INJURY. Do not use any type of reactive gases, including, but not limited to, oxygen and combustible gases, as a power source. Use filtered, lubricated, regulated compressed air only. Use of a reactive gas instead of compressed air may cause the tool to explode which will cause death or serious personal injury. Use only a pressureregulated compressed air source to limit the air pressure supplied to the tool. The regulated pressure must not exceed 100 psi. If the regulator fails, the pressure delivered to the tool must not exceed 200 psi. The tool could explode which will cause death or serious personal injury. Never use gasoline or other flammable liquids to clean the tool. Never use the tool in the presence of flammable liquids or gases. ! DANGER Vapors could ignite by a spark and cause an explosion which will result in death or serious personal injury. Always remain in a firmly balanced position when using or handling the tool. Do not remove, tamper with, or otherwise cause the Work Co...