Bolt cap should be on the opposite side of leg from the hinge. 5. Repeat for other set of legs. 6. Position both sets of legs in the upright position with hinges facing one another. 7. Based on the height of the children to be using the easel, determine whether the upper set or the lower set of holes will be used to mount the 2 boards. 8. Attach the green chalkboard (D) to one side of the legs using 4 of the 1 V2" bolts (H) and bolt caps (I). Made in China Alvin & Company, Inc. Bloomfield,

- so it works particularly well where space is at a premium or where a lighter scale presence is desired. The raised leg enhances the lightness of scale and provides easy access for cleaners. CITI is finished beautifully in Italian Leather or Leather/Mock Leather combinations. Cushions are sewn with doubleneedle-stitched seams and sits high and firm, making it extremely appropriate as reception area or office seating. DESCRIPTION DIMENSIONS SEAT HEIGHT W D H IN IN IN IN mm mm mm mm 78

Align metal holes with peg holes. 3. Place collar (C) over exposed peg. 4. Place screw (D) through collar (C) then attach metal legs (B) to seat bottom using screws. Part List 1 Dahlia Seat (A) 1 Metal Legs (B) 4 Collars (C) 4 Screws (D) www.LumiSource.com

In case of damage, DO NOT use. Contact Carrier/Invacare for further instructions. SAFETY SUMMARY The following recommendations are made for the safe and proper installation and use of the Ventilator Tray: GENERAL WARNINGS DO NOT install this equipment without first reading and understanding this instruction sheet. If you are unable to understand the Warnings, Cautions and Instructions, contact a healthcare professional, dealer or technical personnel if applicable, before attempting to install th

_______ Serial No. _______ Dear Customer Please fill in the model and serial numbers above from the label on the bottom of the seat of your new highchair. Model No. 3170 Highchair Failure to follow these warnings and the assembly instructions could result in serious injury or death. Prevent serious injury or death from falls or sliding out. Always secure child in the restraint. Secure your child at all times with the restraint system provided. The tray is not designed to hold your child in the h

(CM) SHIPPING WT. LB. (KG.) 2445 181/4 (46.36) 351/2 (90.17) 29 (73.66) 201/2 (52.07) 17 (7.71) 2446 181/4 (46.36) 351/2 (90.17) 29 (73.66) 201/2 (52.07) 17 (7.71) 2447 181/4 (46.36) 351/2 (90.17) 29 (73.66) 201/2 (52.07) 17 (7.71) ORDERING INFORMATION MODEL DESCRIPTION 2445KSW White High Chair with Walnut vinyl pad 2445KSL White High Chair with Lemon vinyl pad 2446KSW Brown High Chair with Walnut vinyl pad 2447KSG Gray High Chair with Gray vinyl pad 446-13 Replacement Plastic Tray

They feature web safety straps, positive lock buckles, large casters, and three-position molded plastic trays. These high chairs are available in white, brown or gray. 2445-1097 PEDESTAL HIGH CHAIRS 2445, 2446, 2447 2445, 2446, 2447 PEDESTAL HIGH CHAIR 2445, 2446, 2447 PEDESTAL HIGH CHAIR SPECIFICATIONS DIMENSIONS MODEL NUMBER WIDTH IN. (CM) HEIGHT IN. (CM) HEIGHT OF TRAY LEVEL IN. (CM) DEPTH IN. (CM) SHIPPING WT. LB. (KG.) 2445 181/4 (46.36) 351/2 (90.17) 29 (73.66) 201/2 (52.07) 17 (7.

They feature web safety straps, positive lock buckles, large casters, and three-position molded plastic trays. These high chairs are available in white, brown or gray. 2445-1097 PEDESTAL HIGH CHAIRS 2445, 2446, 2447 2445, 2446, 2447 PEDESTAL HIGH CHAIR 2445, 2446, 2447 PEDESTAL HIGH CHAIR SPECIFICATIONS DIMENSIONS MODEL NUMBER WIDTH IN. (CM) HEIGHT IN. (CM) HEIGHT OF TRAY LEVEL IN. (CM) DEPTH IN. (CM) SHIPPING WT. LB. (KG.) 2445 181/4 (46.36) 351/2 (90.17) 29 (73.66) 201/2 (52.07) 17 (7.

LuriTiSmurce, Inc. SMOOCH CHAIR™ Assembly Instructions Instrucciones De Asamblea Instructions d'Assemblée Part# CHR-SMOOCH-X 5 S Step 1: Place short pontil 1 in proper position, then use screw 6 to fix it, but not too tight on both ends. Step 2: Place long pontil 2 In proper position, then use screw 6 to fix it, but not too tight on both ends. Step 3: Place long plank 3 in proper position, then use screw 5 to fix it, but not too tight on both ends. Step 4: Place short plank 4 in proper