Évaluations - 4, GPA: 3.8
(
)
)
|
Facilité d'utilisation
See "ABOUT YOUR AUTOMATIC CYCLES." LOAD TYPES FOR AUTOMATIC REGULAR CYCLE MAXI-DRY - For fabrics that absorb a lot of water such as cotton quilts, rugs and unusually large or heavy items. This setting probably won't be required for most loads. NORMAL - For cottons such as cotton knits, corduroys, cotton work clothes and mixed loads. LESS DRY OR DELICATE - For medium and lightweight fabrics (not permanent press) as in dresses, dress shirts and for delicate items. These cycles have approximately 5 minute cool-down (no-heat) period at the end of the cycle. AUTOMATIC PERMANENT PRESS - For permanent press, polyester knits and other synthetics that are "no iron”. This cycle has a 10 minute cool-down (no-heat) period before the "COOL 'N TUMBLE". The signal will buzz as a reminder to remove the clothes. If they are not removed at this time, the dryer will continue to tumble with no heat for an additional 16 minutes. The signal will buzz approximately 4 minutes as a reminder. SUGGESTED DRYER SETTINGS AUTOMATIC REGULAR/DELICATE CYCLES LOAD TYPE FABRIC SETTING (Temperature) CYCLE (Timer Setting) Heavy Cottons Normal MAXI DRY Cotton Work Clothes Cotton Knits Normal NORMAL Dresses & Dress Shirts Normal LESS DRY Sheer & Very Lightweight Cottons, Items Labeled "Dry With Low Heat" Delicate DELICATE AUTOMATIC PERMANENT PRESS CYCLE LOAD TYPE FABRIC SETTING (Temperature) CYCLE (Timer Setting) Permanent Press Polyester Knits Heavy & Medium Weight Synthetics Permanent Press AUTOMATIC PERMANENT PRESS Lightweight, Deli-cates, Sheers & Items Labeled "Dry With Low Heat" Delicate AUTOMATIC PERMANENT PRESS The suggested timer settings are approximate. Check garment care labels for proper dryer setting. At first, set indicator toward center of drying zone. You may find you will get better results for your loads by setting the indicator to either side. Turn timer knob to a lower setting (clockwise) for less drying, or to a higher setting (counterclockwise) for more drying. The heat on the "delicate" setting is not sufficient to remove wrinkles from permanent press. ABOUT YOUR AUTOMATIC CYCLES NORMAL - Use this setting for cotton work clothes, cotton sheets, dresses and shirts. DELICATE - Use this cycle for sheer and very lightweight cottons and those items labeled "Dry With Low Heat". Set FABRIC selector on "delicate" when using the DELICATE cycle. The timer knob does not advance at an even pace in the automatic cycles as it does in the time cycle. For instance, you may notice the timer knob remains in the same position for 15 minutes before it begins to move. THE TIMER IS NOT MALFUNCTIONING. This only means it took 15 minutes for the load to become dry enough to start advancing the timer knob. The length of time it takes for the timer knob to begin advancing depends on the type and size of load being dried. Depending on the model of dryer you have, it may or may not have all the following selections: MAXI DRY - Use this setting when drying relatively full loads of heavy cottons. -6- PERMANENT PRESS -Use this setting for permanent press, polyester knits and heavy and medium weight synthetics. The "cool 'n tumble" portion of the cycle tumbles the load without heat for about 16 minutes after the load is dry. This helps to eliminate wrinkling. COOL-DOWN PERIODS - Each cycle has a cool-down period at the end of the cycle. During that time, the load is tumbled with no heat. This helps reduce wrinkling. Setting the timer knob in a cool down position will result in the load being tumbled with no heat. TIME CYCLE This cycle will operate the dryer for the number of minutes for w...
Ce manuel est également adapté pour les modèles :Séchoirs - LG2501 (1.78 mb)