Évaluations - 2, GPA: 4.5 ( )

Fabricant : Maytag Taille : 928.54 kb Nom Fichier : 840167901.pdf Langue d'enseignement:

5. Do not allow cord to touch hot surfaces. Loop cord loosely around appliance when storing. 6. Always disconnect appliance from electrical outlet when not in use. 7. Do not operate appliance with a damaged has been dropped or damaged. To reduce the risk of electric shock, do not disassemble or attempt to Call our toll-free customer service number on examination and repair. Incorrrect reassembly or repair could cause a risk of fire, electric shock, or injury to when the appliance is used. 8. Close supervision is necessary for any appliance being used or near children. SAVE THESE INSTRUCTIONS! OTHER CONSUMER SAFETY INFORMATION This appliance is intended for household use only. WARNING! Shock Hazard: This appliance has a polarized plug (one wide blade) that reduces the risk of electric shock. The plug fits only one way into a polarized outlet. Do not defeat the safety purpose of the plug by modifying the plug in any way or using an adaptor. If the plug does not fit, reverse the plug. If it still does not fit, have an electrician replace the outlet. 2 The length of the cord used on this appliance was selected to reduce the hazards of becoming tangled in, or tripping over a longer cord. If a longer cord is necessary an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the rating of the appliance. 3 Parts and Features Shelves Shelf Separators Tower Support Rods Power Switch Hanging Unit Corner Anchors Air Intake Grills Hanging Unit available on select Foot 840167901 ENv02.qxd 9/14/07 3:30 PM Page 3 Shelves Shelf Separators Tower Support Rods Power Switch Hanging Unit Corner Anchors Air Intake Grills Hanging Unit available on select Foot 840167901 ENv02.qxd 9/14/07 3:30 PM Page 3 4 How to Use the 1 4 5 Assemble shelves on a flat sur-face. Roll out shelf so zipper is closest to you. Open zipper. Insert side rod into corner anchors. Side rods are rolled in with webbing. 2 Repeat with remaining side rod on right hand side. 3 Insert side rod into left-hand pre- sewn sleeve. Assemble unit on a flat surface. Go to dryingstation.com to see a video of how to assemble. 6 Close zipper to tighten shelf mesh. 8 Assemble one shelf at a time beginning with lowest shelf with feet. Attach the feet to first assem-bled shelf. Press firmly to lock in place. 7 840167901 ENv02.qxd 9/14/07 3:30 PM Page 4 1 4 5 Assemble shelves on a flat sur-face. Roll out shelf so zipper is closest to you. Open zipper. Insert side rod into corner anchors. Side rods are rolled in with webbing. 2 Repeat with remaining side rod on right hand side. 3 Insert side rod into left-hand pre- sewn sleeve. Assemble unit on a flat surface. Go to dryingstation.com to see a video of how to assemble. 6 Close zipper to tighten shelf mesh. 8 Assemble one shelf at a time beginning with lowest shelf with feet. Attach the feet to first assem-bled shelf. Press firmly to lock in place. 7 840167901 ENv02.qxd 9/14/07 3:30 PM Page 4 5 9 Lay clothes on s...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :