Log:
Évaluations - 2, GPA: 3 ( )

Instructions Philips, Modèle BABYSITTER SBC SC 368

Fabricant : Philips
Taille : 322.34 kb
Nom Fichier : 40b1bd81-9901-4e7b-8300-fb7c0c8465fd.pdf
Langue d'enseignement: itenesfrdenlptfi
Aller à la télécharger



Facilité d'utilisation


............página 10 Illustraciones......................................................3 Especificaciones tecnicas................................34 Italiano.................. .............pagina 13 Illustrazioni.........................................................3 Specificazioni techniche...................................34 Portugués.............. ..........página 16 Ilustraçoes.........................................................3 Especificaçoes técnicas...................................34 EAAnviKÓ................. ...........osAiSa 19 AnEIKONIIEII......................................................3 TEXNIKA ITOIXEIA............................................34 Deutsch.........................................Seite 22 Illustrationen......................................................3 Technische Daten............................................35 Nederlands................ ...........pagina 25 Illustraties..........................................................3 Technische gegevens......................................35 Svenska.........................................sida 28 Illustrationer.......................................................3 Tekniska Data..................................................35 Suomi............................. ..................sivu 31 Kuvat..................................................................3 Tekniset tiedot.................................................35 2 ш 3 О и 1 — 5 3--- 3 SBC368 page 4 1. GENERAL CONTENTS_ INTRODUCTION_ 1 GENERAL 4 Congratulations! You have just purchased a truly cordless Babysitter (SBC SC368) that 2. QU|CK REFERENCE.................................4 enables you to monitor your child from 3. POWER SUPPLY...................................4-5 wherever you are in and around your house. 4 OPERATION 5-6 The Babysitter has been tested to meet all necessary regulations and standards, and TECHN|CAL SPEC|F|CAT|ONS..............34 features a rechargeable battery back-up that ILLUSTRATIONS......................................3 guarantees operation at all times. Note: While the Babysitter is intended as an aid, it is not a replacement for real parent supervision and should not be used as such. 2. QUICK REFERENCE _QUICK REFERENCE_ I.Connect one of the enclosed mains adapters to the 'baby unit' (transmitter) and the other to the 'parent unit' (receiver) recharging base (fig- 3). 2.Switch the transmitter on (fig. 1.4) and place it near the baby's bed. 3.Place the receiver in the recharging base (fig. 3). 4.Switch the receiver on to an acceptable sound level (fig. 1.2). - Every time sound is detected from or near the baby, it is transmitted to the parent's unit. 5.Adjust the sound level on the receiver as required. 3. POWER SUPPLY Mains power supply_ • Check that the mains voltage as indicated on the mains adapter corresponds to your local mains voltage. If it does not, consult your dealer or our service organisation. • Connect a mains adapter to the transmitter as indicated in fig. 3 • Place the receiver inside the recharging base and connect a mains adapter as indicated in rig. 3 - If the mains power adapter is connected correctly, the red CHARGE LED on the recharging base lights up. Battery power supply_ Transmitter (batteries not enclosed) • Install batteries inside the transmitter as indicated in fig. 2 for cordless transmitter operation. Receiver (batteries enclosed) - Rechargeable battery pack is already installed inside the receiver. • For maximum battery life make sure that the batteries inside the receiver are totally discharged and recharged on a regular basis. 4 SBC368page 5 3. POWER SUPPLY Notes Both the transmitter and receiver have a 'battery low' indication. If the batteries are low the red POWER LED starts flashing. To conserve batteries, connect the units to the mains by using the enclosed mains adapters. If batteries are installed and the mains power adapters are connected, the units operate on mains power. In the event of a mains failure, the batteries will take over. IMPORTANT Replace batteries inside the transmitter with original PHILIPS LR6 POWERLIFE batteries only. Battery pack inside the receiver has already been installed. Have these batteries replaced only by an official dealer or our service organisation! 4. OPERATION OPERATION (fig. 4)_ Transmitter • Make sure the mains power adapter is connected correctly, or batteries are installed. • Place the transmitter near the baby's bed, making sure that the microphone is placed in the best position for picking up baby's sounds. IMPORTANT! Make sure that the transmitter is always out of reach of the baby: never place the transmitter inside baby's bed or playpen! • Switch the transmitter on using the ON/OFF switch (fig-14). - The red POWER LED lights up. - If sound is picked up by the built-in microphone, the transmitter starts transmitting automatically. The transmissio...

Ce manuel est également adapté pour les modèles :
Séchoirs - BABYSITTER SBC SC 368 (322.34 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories