Évaluations - 3, GPA: 4.3 ( )

Fabricant : GE Taille : 1.57 mb Nom Fichier : Langue d'enseignement:

• Make sure the power socket is reliably grounded. The grounding terminal should not be connected to gas or tap water pipelines. • Make sure exhaust duct has been properly connected. • Make sure lint filter is clean and properly installed. If lint filter is not in place, tumbling items could enter the exhaust system and cause damage to the dryer. Note: Applies to Auto Dry cycle and Timed Dry cycle. LOAD CLOTHES INTO DRYER • The appropriate load should be 1/3 ~ 1/2 of the drum volume. Avoid too much load, as space is needed to allow clothes free rotation for uniform and wrinkle-proof drying. • When drying big articles, only 2-3 pieces should be loaded at a time and supplemented with small and medium-sized articles. • For delicate clothes or less load, two towels may be added to get better drying and wrinkle-proof effects. • Do not excessively dry clothes to avoid wrinkles, shrinkage, roughness, electro-static charge accumulation, and/or more lint. 20 English AUTO DRY CYCLE 1. Turn the knob to any program except “Off” to power on. The control panel will beep once and the dryer will change from “Off” to the operating status. 2. Set the cycle select dial to required auto dry cycle. The temperature level is preprogrammed. To change this setting: • Press the “Temp” button to set a suitable drying temperature. • There are four available drying temperature: High, Medium, Low, No Heat. • “Temp” in the “Heavy Duty” cycle is “High”. This can not be changed; • “Temp” in the “Normal” cycle can be choosen from “High, Medium, Low”; • “Temp” in the “Whites” cycle can be choosen from “High, Medium, Low”. • “Temp” in the “Delicate” cycle is “Low”. This can not be changed. • Press Start/Pause button. • When starting the machine, close the door first, then press this button. • If a pause is needed during drying, press this button. Pressing again will resume operation. • Regardless of the dryer status (drying, pause or cool down), by turning the dial to “Off” position, the off indicator light will flash for 5 seconds and then the dryer will go into stand by mode. When machine is running, by turning the dial in any direction, the cycle will automatically turn “Off”. Note: To change the cycle press “Start/Pause”, turn dial to new selection and press “Start/Pause” again. 21 English TIMED DRY CYCLE 1. Turn the knob to any program except “Off” to power on. The control panel will beep once and the dryer will change from “Off” to the operating status. If Start/Pause button is not pressed five minutes after powering on, the dryer will automatically return to Off status. 2. Set the cycle select dial to Timed Dry Cycle. 3. There are 3 preprogrammed times, Timed Dry (5 Settings), Gentle Dry and Touch Up. 4. Press “Timed Dry” button to set the required drying time; Press “Temp” button to set the required drying temperature. In “Touch Up” cycle only a 20 minutes Timed Dry can be selected. Temp in “Touch Up” cycle is High Medium Low. Temp in “Gentle Dry” cycle is low only. 5. When...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :