Log:
Évaluations - 1, GPA: 3 ( )

Instructions Allied Telesis, Modèle 195

Fabricant : Allied Telesis
Taille : 1.03 mb
Nom Fichier : fc7b0654-05c1-da14-fdb6-7b0447584ea4.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


Use the valve type shown with hose Kit "B”. HOSE KIT "C" Loader operated by an external valve "3" that is plumbed into the tractor hydraulic system. Consists of four hoses "I" leading from loader tubing "2” to the external mounted valve "3" plus the necessary fittings, hoses and adapter blocks (if necessary) to tap into tractor hydraulic system. Use valve type shown with hose Kit "C". /K IMPORTANT PRECAUTIONS A DANGER Æ ELECTROCUTION HAZARD To prevent serious injury or death: • Stay away from power lines and cables. Electrocution can occur with or without direct contact. A WARNING CRUSHING HAZARD To prevent serious injury or death: • Do not handle round bales or other shiftable objects unless loader is equipped with an attachment designed for this purpose. • Do not handle loose loads that are not secured. L>Po not lift load higher than necessary. ^ ' A WARNING ' ROLL-OVER HAZARD To prevent serious injury or death: • Move and turn tractor at low speed. • Carry load no higher than necessary to clear the ground when transporting. • Add wheel ballast or rear weight for stability. • Move wheels to widest possible settings to increase stability. • It is recommended the tractor be equipped with a rollover protective structure (ROPS). J A WARNING FALLING HAZARD To prevent serious injury or death: • Do not lift, carry or allow anyone to ride on or work from any portion of loader. ’ A WARNING ' HIGH-PRESSURE FLUID To prevent serious injury or death: • Relieve pressure on system before repairing or adjusting or disconnecting. • Wear proper hand and eye protection when searching for leaks. Use wood or cardboard instead of hands. • Keep all components in good repair. • If hydraulic fluid penetrates skin, obtain medical treatment IMMEADIATELY. V_—_/ A WARNING CRUSHING HAZARD To prevent serious injury or death: • Do not allow bystanders in loader work area. • Lower loader to the ground before leaving seat. • Do not walk or work under raised loader. For servicing, refer to operator’s manual. • Read and understand operator's manual before operating loader. Safety Decals These decals are located as shown on the Decal Location diagram and the Sub-Frame Assembly diagram. A WARNING I A CAUTION 8$b 1. Read Operator’s Manual before operating. 2. Move and turn tractor at low speed. 3. Carry loader arms at a low position during transport 4. Lower loader arms, stop engine and lock brakes before leaving operator seat 5. Do not stand or work under raised loader, unless properly supported. 6. Add recommended wheel ballast or rear weight for stability. 7. Move wheels to widest recommended settings to increase stability. 8. Do not handle large round bales or other shiftable objects unless loader is equipped with a grapple fork. 9. Do not use loader to move or carry people. 10. Stay away from power lines. Electrocution can occur without direct contact 11. Review safety instructions annually. M1M12 OVERHEAD HAZARD STAY AWAY FROM UNDER LIFT ARMS AND BUCKET To prevent serious injury or death: 1. Do not stand or work under a raised loader, unless supported. 2. Support bucket and lift arms before working under loader. ' 3. Lower loader to the ground before leaving seat ! Torque Specifications Recommended Torque in Foot Pounds (ft-lbs) & Newton Meters (NM)* Metric Bolt Dia. (mm) Wrench Size (mm) Bolt Head O Q Ç) Class 4.6 (ft-lbs) (NM) Class 8.8 (ft-lbs) (NM) Class 9.8 (ft-lbs) (NM) 8 13 7.3 10 21.1 29 10 16 14.5 20 42 57 12 18 25 34 74 100 73 99 14 21 40 54 118 160 116 157 16 24 62 84 167 226 181 245 20 30 122 165 325 440 22 33 443 600 24 36 211 286 563 763 27 41 821 1112 30 46 418 566 1119 1516 Sts nda red Bolt Diameter (inches) Wrench Size (inches) Bolt Head o Grade 2 (ft-lbs) (NM) £> Grade 5 (ft-lbs) (NM) © Grade 8 (ft-lbs) (NM) 0.250 1/4 7/16 6 7 8 11 12 16 0.313 5/16 1/2 11 15 17 23 25 33 0.375 3/8 9/16 20 27 31 42 44 60 0.438 7/16 5/8 32 43 49 66 70 95 0.500 1/2 3/4 49 66 76 103 106 144 0.563 9/16 7/8 70 95 109 148 153 207 0.625 5/8 15/16 97 131 150 203 212 287 0.750 3/4 1 1/8 144 195 266 360 376 509 0.875 7/8 1 5/16 166 225 430 583 606 821 1.000 1 1 1/2 250 339 644 873 909 1232 1.125 1 1/8 1 11/16 354 480 795 1077 1288 1745 1.250 1 1/4 1 7/8 500 678 1120 1518 1817 2462 1.375 1 3/8 2 1/16 655 887 1470 1992 2382 3228 1.500 1 1/2 2 1/4 870 1179 1950 2642 3161 4283 ‘Use 80% of the specified torque value for plated or lubricated fasteners. P3696-02COR General Instructions and Information As with any piece of equipment, the care with which your loader is operated and maintained will greatly affect it's life and the safety of the people using it. 1. Keep all pivots well lubricated for longer bushing life. Inspect every 500 hours of operation for wear. 2. Periodically check all bolts for tightness. If any bolt is damaged, replace it with a bolt of equivalent grade or strength. 3. Follow the reco...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories