Log:
Évaluations - 3, GPA: 3.3 ( )

Instructions American Dryer Corp., Modèle 30 lb. Stacked Models

Fabricant : American Dryer Corp.
Taille : 2.2 mb
Nom Fichier : d9a527cd-9e99-4106-8e7e-5035fa948138.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


Wiring errors can cause improper and dangerous operation. Please post in a prominent location. Instructions to be followed in the event the user smells gas. The information posted shall be obtained by consulting with your local gas supplier. The wiring diagram for the dryer is located in the front electrical control box. 1 This product embodies advanced concepts in engineering, design and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble -free operation. ONLY qualified professional technicians should service this equipment. Observe all safety precautions displayed on the equipment or specified in the installation instructions included with the dryer. Under NO circumstances should the dryer door switch or the heat circuit safety devices ever be disabled. We have tried to make these instructions as complete as possible and hope you will find it useful. Manufacturer reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and materials and to change or discontinue models. For replacement parts, contact the distributor from which the dryer was purchased or contact: Maytag One Dependability Square Newton, Iowa 50208 (515) 792-7000 IMPORTANT For your convenience, log the following information: Date of Purchase_ Model No._ Distributor's Name_ Serial Number(s) _ NOTE: The model number(s) and serial number(s) can be found on the data label located on the back side of the control (middle) door. 2 IMPORTANT INFORMATION RECEIVING AND HANDLING The dryer is shipped in a protective stretch wrap cover and protective cardboard corners and top cover as a means of preventing damage in transit. Upon delivery, the dryer and wooden skid should be visually inspected for shipping damage. If any damage whatsoever is noticed, inspect further. When dryers have been damaged in shipment, follow these procedures: 1. All dryers should be inspected upon receipt and before they are signed for. 2. If there is suspected damage or actual damage, the trucker's receipt should be so noted. 3. If the dryer is damaged beyond repair, it should be refused. Those dryers which were not damaged in a damaged shipment should be accepted, but the number received and number refused must be noted on the receipt. 4. If you determine that the dryer has been damaged after the trucker has left your location, you should call your local freight terminal immediately and request an inspection and freight claim form. The freight company considers this concealed damage. This type of freight claim is very difficult when a day or two passes after the freight was delivered. 5. Freight claims are the responsibility of the consignee, and all claims must be filed at receiving end. Manufacturer assumes no responsibility for freight claims or damages. IMPORTANT: THE DRYER SHOULD BE TRANSPORTED AND HANDLED IN AN UPRIGHT POSITION AT ALL TIMES. SAFETY PRECAUTIONS 1. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. 2. Purchaser/user should consult the local gas supplier for proper instructions to be followed in the event the user smells gas. The instructions should be posted in a prominent location. 3. Dryer must be exhausted to the outdoors. 4. Although this commercial dryer is a very versatile machine, there are some articles that, due to fabric composition or cleaning method, should not be dried in it. WARNING: DRY ONLY WATER-WASHED FABRICS. DO NOT DRY ARTICLES SPOTTED OR WASHED IN DRY CLEANING SOLVENTS, A COMBUSTIBLE DETERGENT, OR “ALL PURPOSE” CLEANERS. FIRE OR EXPLOSION COULD RESULT. WARNING: DO NOT DRY RAGS OR ARTICLES COATED WITH GASOLINE, KEROSENE, PAINT, WAX, OIL, OR GREASE. FIRE OR EXPLOSION COULD RESULT. 3 WARNING: DO NOT DRY MOPHEADS. CONTAMINATION BY WAX OR FLAMMABLE SOLVENTS WILL CREATE A FIRE HAZARD. WARNING: DO NOT USE HEAT FOR DRYING ARTICLES THAT CONTAIN PLASTIC, FOAM, SPONGE RUBBER, OR SIMILARLY TEXTURED RUBBERLIKE MATERIALS. DRYING IN A HEATED TUMBLER MAY DAMAGE PLASTICS OR RUBBER AND ALSO MAY BE A FIRE HAZARD. 5. A program should be established for the inspection and cleaning of the lint in the burner areas and exhaust duct work. The frequency of cleaning can best be determined from experience at each location. WARNING: THE COLLECTION OF LINT IN THE BURNER AREA AND EXHAUST DUCT WORK CAN CREATE A POTENTIAL FIRE HAZARD. 6. For personal safety, the dryer must be electrically grounded in accordance with local codes and/or the National Electric Code ANSI/ NFPA No. 70 (Latest Edition). NOTE: Fail ure to do so will void the warranty. 7. Under no circumstances should the dryer door switch(es) or heat safety devices ever be disabled. WARNING: PERSONAL INJURY OR FIRE COULD RESULT. 8. Articles being dried should never be left unattended for an extended period of time in the tumbler after completion of the drying and cooling cycles. WARNING: ...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories